Close

Hack Chat Transcript, Part 1

A event log for The Art of Nixies Hack Chat

Art under glass

dan-maloneyDan Maloney 10/28/2020 at 20:270 Comments

OK folks, let's get going. I'm Dan and I'll be the mod today for Dalibor Farny, who we're very glad to welcome to the chat.

Hi Dalibor, thanks for joining us today. Can you start us off with a little about your background and how you got started in Nixies?

Dalibor Farny12:01 PM
Hi everyone, I am really pleased you took your time to come here to have a chat today..

Dalibor Farny12:02 PM
My name is Dalibor Farny, I live in Czech Republic (a small country next to Germany :-) )..

Nathan Diniz12:03 PM
wow! That's a long ways away from where I live.

Dalibor Farny12:03 PM
Before starting with nixie tubes in 2011, I was mostly in software - programming web apps, but I was also running my own projects as a business. It was a bit too stereotypic..

j12:03 PM
Q:

You talked about the new spectroscope so that you can analyze the anode poisoning. Do you have a hint, what you will look for?

Or is there a way to use different gas'es so there is a different color glowing on the cathode?

imo: If anybode could pull that off, its you. Best wishes from Berlin, Germany

Dalibor Farny12:03 PM
And when I found nixie tubes.. I fell in love..

opeRaptor12:04 PM
Hello @Dalibor Farny

opeRaptor12:05 PM
Thank you for taking the time to hackChat with us!

Dalibor Farny12:05 PM
@j the cathode poisoning - I now have alsmost all parts I need, now looking for a scroll pump.. As for the gases - it is possible, but from what I tried with argon, the lifespan is very short.. In couple of days the tube is heavily sputtered.

Jon Foote12:06 PM
Do you use a Penning mixture?

Dalibor Farny12:06 PM
Also, I cant use mercury to limit the sputtering of the metal - the mercury haze is more visible than the dim argon glow :-) So it looks like all the tube glows..

Dalibor Farny12:06 PM
yes, Penning mixture

Jon Foote12:06 PM
Thanks! Is that a standard ratio?

Lightning Phil12:06 PM
q

nick joined the room.12:06 PM

Nathan Diniz12:06 PM
I want to save this chat.

@Nathan Diniz - No worries, I post a transcript right after the chat

Lightning Phil12:07 PM
Q - which alloy are you using for the filaments - if that's what they're called in a nixi?

Nathan Diniz12:07 PM
cool

Dalibor Farny12:07 PM
another possibility is to use a helium - lightweight molecule that might not cause such erosion of the metal cathodes..

nick12:07 PM
Hi Dalibor - nick from the UK & Dubai here (and mod of neonixie-l) - Just love you clock - has pride of place in our house...

Dalibor Farny12:08 PM
@nick Hi Nick, nice to meet you here :-)

Dalibor Farny12:09 PM
@Lightning Phil we use 304 stainless steel that is commonly available and very good in terms of lifespan.. I heard that other manufacturers used Ni or NiFe cathodes as well as SS

Clive12:09 PM
Q - what is the lifespan using Helium?

Dalibor Farny12:10 PM
@Clive I havent tried - the problem with argon is that we need to go to 5 times higher current to get the glow cover whole digit.. This makes the evaporation of the metal really fast..

Andy Geppert12:10 PM
@Dalibor Farny Q: From your testing, can you recommend a period of time where each element in a Nixie tube should be activated, and for what duration, to prevent poisoning? Is every 24 hours for a few seconds adequate, in the case of an always-on clock? (Which I know is not a great practice - better to have it motion sensing or only on when someone is around.)

opeRaptor12:11 PM
Have you experimented with epoxy seals for the sockets? I know epoxy tends to degas a lot but do you think it would be possible?

Phil G joined the room.12:11 PM

Dalibor Farny12:11 PM
@Andy Geppert I have a brief info here, I am working on more detailed one: https://docs.daliborfarny.com/documentation/cathode-poisoning-prevention-routine/

Lightning Phil12:11 PM
Thanks Dalibor. Experimented with various tungsten alloys - thoriated being quite good - for x-ray production. Still spluttered. Wondering if the coatings used to low emission temp of cathodes would assist in spluttering reduction - they can be quite inert.

Dalibor Farny12:11 PM
generally, it is about the ratio between on/off time.

Dalibor Farny12:13 PM
@Lightning Phil as far as I know, coating was never used for nixie tube cathodes - it would simply wear out over time. Well made tube will last decades (using standard materials) - I believe this is enough..

Dalibor Farny12:13 PM
Most of my efforts are now in getting leak rate lower and making sure we don't bring in contamination..

Lightning Phil12:13 PM
Thanks :) Not having 100 kV should help too

Clive12:14 PM
Q - What is the recommended on/off ratio?

Dalibor Farny12:14 PM
Good news is that we havent had a leaky tube in last 4000 manufactured tubes - I mean reported leak by customer, we rejected couple of leakers before shipping

Lightning Phil12:15 PM
Wow, that's a good streak

Dalibor Farny12:15 PM
@Clive I recommend to go through the link, the ratio is described here: https://docs.daliborfarny.com/documentation/cathode-poisoning-prevention-routine/

Phil G12:15 PM
@Lightning Phil long ago I worked on cathodes for ion rockets for about a year. They used porous tungsten electrodes with a consumable work function lowering material inside

Dalibor Farny12:16 PM
@Lightning Phil I am sure some tubes will develop a leak over time, but it wont get as high as our first batches years ago ..

Andy Geppert12:16 PM
@Dalibor Farny Great web link to avoid poisoning, thank you for sharing that.

j12:16 PM
Q: If you'd put a single Tube on a pendulum and use the fast switching time of a nixie-tube you could flash the numbers in space and build a swinging clock with it (You asked on twitter in a while, what you should do with only one nTube). I tried to build one. the numbers 0-10 show up nicely next to each other. the POV effeckt will not show effect, but one gets it. should i post a pic here ?

Dalibor Farny12:16 PM
@Phil G Tungsten would be best for the cathodes, but it is very difficult to form into shapes - not possible to etch etc..

Phil G12:17 PM
yes, its not easy to work with.

Lightning Phil12:17 PM
Well 4000 successes is still great. Yesterday I retuned my 3rd duff Kodak 3D printer. That's 3 out of 3 failed.

What metal do you use for cathodes now? Inconel, perhaps?

Dalibor Farny12:17 PM
@Dan Maloney 304 stainless steel

nick12:17 PM

Cool, TIL

opeRaptor12:18 PM
@Dalibor Farny Have you experimented with epoxy seals for the sockets? I know epoxy tends to degas a lot but do you think it would be possible?

Dalibor Farny12:18 PM
@Lightning Phil I wonder how these companies handle the warranty - must be crazy

Phil G12:18 PM
I'm trying to remember the name of the company that did it. They were in kentucky, and they owned the "tungsten hollow cathode" market. TWTs, klystrons, etc.

Lightning Phil12:18 PM
@Phil G - ion rockets sound fun.

Lightning Phil12:18 PM
Think Kodak is too massive to sink.

W5VO12:18 PM
Do you have to use a special glass to CTE-match the 304 stainless?

Phil G12:18 PM
@Lightning Phil it should have been. it was wasn't. that's a story for beers

Dalibor Farny12:19 PM
@opeRaptor epoxy is good only for vacuum chambers etc.. not for tubes, it would outgas overtime. It also cant survive 120C+ temperature

Lightning Phil12:19 PM
@Phil G good plan

Jon Foote12:19 PM
Yes have some old HeNe laser tubes where the lenses are epoxied on. No good!

Dalibor Farny12:19 PM
@W5VO we spotweld the 304 cathodes to tungsten that matches the COE of the glass

Guru-san12:20 PM
@Dalibor Farny what is the ratio of leaky tube you have found at QC? and is there a specific cause that's recurrent?

opeRaptor12:20 PM
Thank you @Dalibor Farny

Phil G12:20 PM
@Lightning Phil Google "barium dispenser cathode," to learn about that class of cathode...

Lightning Phil12:21 PM
@opeRaptor Torr Seal is pretty good but pricy. True it's good for pumped systems but not too shabby regarding outgassing and temperature

Dalibor Farny12:21 PM
@Guru-san not many, I think there is a box of 5-7 leaky tubes that were accumulated over 2-3 months. I will open them eventually to see what was wrong with them.

Dalibor Farny12:22 PM
@Lightning Phil yes, torr seal is perfect, I will use it for the gas analyzer - we will connect a glass pipe to the nixie tube using torr seal

Guru-san12:23 PM
Thanks @Dalibor Farny, that's some rigorous craftsmanship!

Dalibor Farny12:23 PM
If you are interested in anything from the "behind the scenes", feel free to ask. But we can continue with technical stuff, I could talk about it all day long :-)

Dalibor Farny12:23 PM
@nick nice photo, I see there is a place for the colon tubes :-)

dave12:24 PM
Can you speak more about the manufacturing process?

I'm interested in how you got on to speed on the whole process. Running that lathe alone must have been a huge learning curve.

Phil G12:24 PM
@Dalibor Farny I notice that you keep a public sales and cash on hand record, have you always done that?

Phil G12:25 PM
and what products pay the bills?

Phil G12:26 PM
also, what did you do before Nixies?

Dalibor Farny12:26 PM
@Dan Maloney the learning is the most time consuming process - the general issue of the nixie tube resurrection attempt is that we need to do so many different trades at the same time to be able to make the tubes well

Richard Scales12:26 PM
Do you see the process being automated further in any way which might create opportunities to build smaller tube sizes or is there a point below which it will never be commercially viable?

Lightning Phil12:26 PM
To add to the barrage of questions - why vacuum level do you use in the tubes you ship?

Dalibor Farny12:27 PM
@Phil G it wasnt always live, but from the beginning I published the financial statistics. I am planning a video on a cost structure - how much we pay for rent/material/wages etc..

Phil G12:27 PM
has COVID been good for business, or bad?

Lightning Phil12:28 PM
@Phil G - googled "barium dispenser cathode" - looks healthier than some Cadmium based ones I've seen (and avoided)

Dalibor Farny12:28 PM
@Richard Scales I want to build machines that will allow us to do things more productively - machine by machine.. I don't think anyone will ever be able to invest into automated nixie tube production - the market is very small and this is what I like on it :-)

pbx12:29 PM
Would it be possible to run a nixie with nitrogen or even low pressure air? The colours produced by N2 are incredibly beautiful, not just in air but also when a vacuum tube develops a leak, it's a stunning purple hue.

Phil G12:29 PM
BTW, I've long wanted to build a tube amp with MCU controls, and the values of the controls show on Nixie

Dalibor Farny12:29 PM
Covid - so far so good, we werent affected, but I am afraid that in long term (1 year), there will be an impact

opeRaptor12:29 PM
@Dalibor Farny I have been told the glass from "back in the days" was different, somewhat easier to work with, can you comment on that?

nick12:31 PM
@Dalibor Farny The clock is beautiful and much admired - it is with an original Jeff Thomas NixiSat (which I had to rebuild a few years ago...)

You are correct in that you seem to have sorted the in-gassing with the the later tubes.

Dalibor Farny12:31 PM
back in the days they had plenty of different materials, including better glasses for manufacture of the tubes (different compositions). Nowadays it is very difficult to obtain these glasses, especially in small quantity

Guru-san12:32 PM
@Dalibor Farny what would be the optimal glass composition for nixie tubes?

Arthur joined the room.12:32 PM

Dalibor Farny12:34 PM
glass composition is dependent on the metal that you use for the wires that goes through the glass - you need to match the thermal expansion. If I could choose one it would be kovar metal and Schott 8250 kovar sealing glass. These two materials make perfect match - the kovar follows the non-linear thermal expansion of the glass, which makes it very good matched seal..

nick12:35 PM

Dalibor Farny12:35 PM
but for hand-forming of the stems (glass to metal seals) we can only use tungsten as it has high melting temperature..

Dalibor Farny12:35 PM
all the other metals would be burned off

Dalibor Farny12:36 PM
@nick amazing - can you see any cathode poisoning on the original 568m tubes? One of our customers tried them in our electronics and they developed poisoning quite fast..

Lightning Phil12:37 PM
Have you had any problems with tungsten wire having longitudinal cracks?

Andy Pugh12:38 PM
Joined late, but a long time ago the tool of my trade was an ion mill. The parts of that that were required to be very resistant to sputtering were Tantalum. That might be the perfect material for the numerals. But probably not the cheapest.

nick12:38 PM
Jeff Thomas NixiSat from 20 years ago (Z5680M tubes) and a Dalibor Farny Zen clock (R|Z568M hand-crafted tubes)

Dalibor Farny12:38 PM
@Lightning Phil not actually, I spent quite lot of time sorting out the suppliers, now we get it from USA - very good and very expensive wire. Before we had problems with slightly contaminated surface of the wire (cleaning on manufacturers side) - this cause us lot of leakers over time :-(

Lightning Phil12:39 PM
eBay tungsten wire is hit and miss... Old stock better than new far East

Dalibor Farny12:39 PM
@Andy Pugh interesting, how it compared to stainless steel and tungsten?

Guru-san12:40 PM
Interesting thanks @Dalibor Farny , Would a "circular stem" (for lack of the appropriate term) need different composition/tooling?

Guru-san12:40 PM

opeRaptor12:40 PM
@Dalibor Farny Is there a way to control the thermal expansion of the glass to mach the tungsten?

Phil G12:40 PM
@Dalibor Farny do you bake out your SS wire?

Andy Pugh12:41 PM
I didn't do any comparisons. We just bought new holders from the manufacturer when they eventually wore out, but that took a long, long time. I just assumed that the manufacturer was using tantalum for a reason.

Dalibor Farny12:41 PM
@Guru-san this is higher level - I am working on it. We have a supplier for the flat stems already and also an old semi automatic sealing machine for envelope-stem seal. I hope to make it all working, if it works out well, we will be able to manufacture a nixie tube with better productivity and lower cost

nick12:41 PM
@Dalibor Farny the NixiSat has no cathode poisoning protection, so if you forget to rotate the tubes the unused digits do get poisoned - thanks for reminding me!! I need to work on those tubes... So many clocks, so little time...

Dalibor Farny12:42 PM
@Phil G we bake out whole nixie tube at the pumping system, we don't bake out individual parst

Kevin12:42 PM
@Dalibor Farny Do you design the tubes to work with existing tube sockets or do you need to make your own sockes?

Lightning Phil12:43 PM
What vacuum level to you pull on the pumping system?

Dalibor Farny12:43 PM
@Andy Pugh it is great experience from the real world - I will try to find a piece of tantalum and do some comparison. In case we need to abandon mercury one day..

Dalibor Farny12:44 PM
@Kevin our current RZ568M tube is compatible with the old socket for Z568M tube. But the new tube will be completely new pin layout as we use soft glass (very tricky and prone to cracks) and I wanted the best possible layout in order to relief stress in the glass

Phil G12:45 PM
@Dalibor Farny got it. what's the getter in the tube at baking?

Dalibor Farny12:46 PM
@Lightning Phil we pump to 10E-6 torr before filling the tubes, I though that it is overkill as the 60s carousels barely got to 10E-4 (mercury diff pumps), but it is not overkill - when you get to -6, you know the tube is clean..

Dalibor Farny12:47 PM
@Phil G we use ZrAl non-evaporable getters from SAES, the traditional flash getters (that mirror on the glass) cant be used as they would amalgamate with mercury over time..

Dalibor Farny12:47 PM
@opeRaptor the COE is determined by composition of the glass, we now use glass that match the COE of tungsten

Lightning Phil12:48 PM
Sounds good. Brimar (https://brimaruk.com/) has inherited a lot of mercury diff pumps. Trying to encourage a move towards a turbo.

@Dalibor Farny - it sounds like there are still suppliers for tube materials and parts. Is that so? If so, what markets are they serving? IOW, besides you, who is still making tubes?

Phil G12:49 PM
@Dalibor Farny how seasonal is your business, do you have to build half the year for the end of year holiday season?

Dalibor Farny12:49 PM
@Lightning Phil I am watching Brimar guys - they got whole factory back to UK, it is crazy task to refurbish the machines.. I am curious whether they can pull it off - fingers crossed!

Lightning Phil12:51 PM
I was helping with their vacuum stuff till COVID kicked in and spoilt the fun. Also I'm moving to Finland so had to step back a bit. Brimar seem to be doing a good job. Starting with the basics and working up.

Dalibor Farny12:51 PM
@Dan Maloney it is actually very difficult - SAES does much more things than just getters (e.g. memory alloys), the tube market is very small. Most of the market is about small audio tubes - Shuguang is China is the biggest manufacturer I think, they supply also other factories with nickel alloys for cathode tubes in indirectly heated tubes..

Dalibor Farny12:52 PM
The tube industry needs very specific materials and the size of the market (small) doesn't allow for a regular factory to operate - it always a factory that got the machines paid in 50s or people investing their savings and trying to find a business model for their productions (new Western Electric tubes, RCH tubes etc..)

I can see that. I mean, your lathe looks like it's straight out of the 50s itself. Pity there's not more demand for tubes -- such a fascinating technology.

Dalibor Farny12:53 PM
@Lightning Phil very interesting, there are not many updates from Brimar online, great to hear they keep going!

Dalibor Farny12:55 PM
@Dan Maloney 1968 :-) it is a beautiful machine.. It is fascinating technology and something where you can actually see the physics - the ICs and more modern stuff is too abstract for me :-)

@Dalibor Farny - I've been following a guy on YouTube called Usagi Electronics - he does logic circuits with vacuum tubes. Really interesting stuff. Might invite him on for a Hack Chat.


https://www.youtube.com/watch?v=UPD1_nIL87s

YouTube Usagi Electric

Lightning Phil12:57 PM
@Dalibor Farny If you're interested in discussing differentially pumped temporary stem seals for degassing tubes I'm happy to do so off line. The but shell version is - to evacuate a vacuum tube with an attached capillary tube - use 2 seals, so the high vacuum seal is only holding high vacuum to low vacuum rather than atmosphere.

Dalibor Farny12:57 PM
@Dan Maloney look at Sam Zeloof - that guy makes his own integrated circuits, whole another level of DIY :-D

Lightning Phil12:57 PM
nut not but

Dalibor Farny12:59 PM
Next year, once H-tube is developed and in production, I want to start on "F" tube - that lower cost tube with flat base. It will need a total reorganization on our side, but I hope we will be able to get our price lower. If we bacnrupt while trying the "F" model, I will continue alone and want to do crazy stuff like a clocks without ICs etc..

Dalibor Farny12:59 PM
just completely 60s technology, as authentic as possible.. Logical circuits with vacuum tubes sonds like something I could learn :-)

Clive1:00 PM
Will follow that for sure!

Lightning Phil1:00 PM
Mechanically controlled Nixie tubes?

So the Project H tube is going to be a product? I thought it was just a build for a special client.

Dalibor Farny1:01 PM
That usagi electronics channel is amazing, I will go through the videos. Looking at how grey the guy became at his age, I expect the stuff he is doing is pretty challenging! :-)

I straight-up love his hairstyle!

Dalibor Farny1:02 PM
@Dan Maloney yes, it must be a product - otherwise it would be a pure loss from the financial point of view. My goal is to get to $400 price for customer - so fingers crossed :-)

curiousmarc1:02 PM
Thanks for the link Dan, didn't know about him!

Holy smokes, just looked at the clock and we've burned through our hour! That was really fast -- too fast, in fact. But, we have to let Dalibor get back to work if he has to. I just want to say a huge thanks to him for spending his time with us today, and to everyone for the great chat.

Lightning Phil1:04 PM
Thanks Dalibor - very interesting chat.

Richard Scales1:04 PM
All super interesting, thanks Dalibor, keep up the great work.

Dalibor Farny1:04 PM
it is 9 pm here already the work was already done today :-)

Dalibor Farny1:05 PM
thank you guys, it is very much motivating to see people interested in what I do. I would give million times without having the community and wonderful customers around. I was great evening (for me!).

OK, well the Hack Chat is always open, so keep the conversation going if you like! I'll wait a little bit to pull a transcript.

Dalibor Farny1:05 PM
Okay, no problem, any other questions you would like to ask guys?

Richard Scales1:06 PM
@Dalibor, still holding on for that RB-7971 ;-)

But I will just mention: no Hack Chat next week. We're taking a break to get ready for Remoticon. Hope to "see" you all there!

Guru-san1:07 PM
Thank you so much for your time @Dalibor Farny, thanks for bringing nixie tubes making back to life :)

Kevin1:07 PM
@Dalibor Farny With environmental concerns resulting in creation/adoption of RoHS why are elements like mercury still being used? Do you have a recycling program for old tubes?

Dalibor Farny1:07 PM
@Richard Scales yes, 7971 tube is something that I would really like to get to..

Richard Scales1:07 PM
Great news - put me down for a set.

Dalibor Farny1:09 PM
@Kevin there is unfortunately no alternative for Hg. I believe we fall under one of the exemptions from RoHS, but this is expiring in June 2021 - I hope the lighting industry will push the renewal. Nixie tubes without mercury are practically useles

Discussions