Close
0%
0%

LoRa gateway single channel PCB

This PCB is a single channel gateway of LoRa, You can use this PCB as a node as well.

Similar projects worth following
This PCB is a single channel gateway of LoRa, You can use this PCB as a node as well. The Pcb uses:

1.ESP8266 as the microcontroller
2.Ra-02 LoRa module.
3.OLED SSD13086 0.96' display
4.Other basic components.

There is also an easy to program header under the OLED display to flash the device by connecting a FTDI chip.

Checkout UTSource for electronic components for your DIY Projects with free shipping: https://www.utsource.net/

ORDERING THE PCB

I would also recommend to get your PCB manufactured at least 2 pieces. You can order your PCBs from PCBWAY as they offer 10 PCBs for just 5$. Check out their online Gerber viewer function.

x-zip-compressed - 300.77 kB - 03/01/2019 at 12:53

Download

  • 1
    Get this PCB manufactured!

    LoRa-gateway-single-channel-PCB

    FRONT SIDE IMAGE OF THE PCB

    This PCB is a sinle channel gateway of LoRa, You can use this PCB as a node as well. The Pcb uses:

    • ESP8266 as the microcontroller
    • Ra-02 LoRa module.
    • OLED SSD13086 0.96' display
    • Other basic components.

    There is also an easy to program header under the OLED display to flash the device by connecting FTDI chip.

    ORDERING THE PCB

    I would also recommend to get your PCB manufactured at least 2 pieces. You can order your PCBs from PCBWAY as they offer 10 PCBs for just 5$. Check out their online Gerber viewer function.

    BACK SIDE IMAGE OF THE PCB

    This is the schematic for the project:

View all instructions

Enjoy this project?

Share

Discussions

teraz wrote 01/19/2022 at 19:14 point

1. is mesh?

2. is possible using this with solar panel?

3. please add normal usb host A for pendrive and storage

  Are you sure? yes | no

ressamendy wrote 06/19/2019 at 13:16 point

This device will connect to the internet with wifi. Do you think of wired internet or LTE connection?

  Are you sure? yes | no

ressamendy wrote 06/19/2019 at 12:46 point

Hi,

Hello there. Is the product assembled? Have you considered an external box design?

http://prntscr.com/o3vhtw

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates