Close

Microsoft MakeCode Arcade

A project log for PewPew M4

A PewPew with a display.

dehipudeʃhipu 12/26/2019 at 20:202 Comments

While designing this, I kept my eye on the MakeCode Arcade specifications to make sure the device could also be used with that platform. But I never really took the time to test it. Today I finally decided to see if it will work.

I updated the bootloader configuration to include information about all the buttons on the device, and I picked one of the examples to run. And lo and behold, it works:

After such a meticulous and throughout test, I decided it's time to add it officially, so I made a pull request to the uf2-samdx1 repository to add the bootloader configuration there (and had to sign a CLA, thank you Microsoft), and also I dropped the Arcade staff an e-mail asking for adding it to the website. We will see what they think about it.

Discussions

titimoby wrote 01/24/2020 at 10:40 point

Do you have any news from the arcade team?

  Are you sure? yes | no

deʃhipu wrote 01/25/2020 at 07:56 point

No. My pull request adding the configuration for the bootloader was merged, though.

  Are you sure? yes | no