1. Adjustment and test.
2. Item from OLD ATX PSU.
3. Some other parts from Utsource.
4. Install the components and solder them.
Product list:
Resistor 10K http://bit.ly/2TMSWXV
Resistor 20K http://bit.ly/2TPQ9Rh
Resistor 1K http://bit.ly/2XXF9R3
Resistor 2K2 http://bit.ly/2AJVU8g
Resistor 470K http://bit.ly/2IYHZzx
VR3296 50K http://bit.ly/2px8dCo
Resistor 10R http://bit.ly/2UTDASo
Transistor S8550 http://bit.ly/30BsXWV
Transistor S8050 http://bit.ly/32qs9FN
Mosfet IRF3205 http://bit.ly/2AMKJM7
Diode 1N4148 http://bit.ly/2RQimq8
Fast Diode MUR460 http://bit.ly/2RMiNSh
Capacitor 4700uF/25V http://bit.ly/2mcGwgk
Capacitor 100uF/500V http://bit.ly/2TO4cU0
Capacitor 33nF http://bit.ly/32Agows
Capacitor 1nF http://bit.ly/2SYCB2s
Capacitor 10uF http://bit.ly/2M9qC34
More details, pls check the video on Youtube:
No written details of testing, performance, etc? What can it drive? What frequency? What is the efficiency for various loads? What should people do if the old transformer is a different shape from what you used? Surely you should provide this kind of information if you expect to tempt people to buy the kit or components from. Utsource?
Kid and rooster noises might be cute but not sure people need to hear you using your tools in the soundtrack.