Close
0%
0%

Low-Cost 3D Printed 6-DOF Manipulator

Using 36:1 Planetary Gear Actuator Module (2ea), 27:1 Planetary Gear Actuator Module (1ea) and 40:1 Cycloid Gear Actuator Module (3ea)

Public Chat
Similar projects worth following
3D Printed 6-DOF Manipulator is produced by combining the previously developed Actuator module. Most of the parts, except bearing and screws, were manufactured using 3D printers for Low-cost.

View project log

Enjoy this project?

Share

Discussions

Rohit wrote 04/23/2020 at 09:27 point

Very nice project. Loved it

Can i get the design Rohit.kr.Sahu@gmail.com

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates