Close
0%
0%

3D printer Interface

Marlin Nextion New Interface

Similar projects worth following
I am making a total new interface for the open source marlin kimbra software.
This time with a 7" nextion intelligent screen in vertical position.

One of the reasons of doing this project was the many problems I've got with my Leapfrog Bolt pro printer, it was a disaster. The first layer was always a big problem, the extruders are sooo bad that is was impossible to work with. Since it wasn't that all open source I wanted to bring new life into this machine. Based on the Marlin Kimbra software I'm started to do so.
If your one of the victims too you can follow me to a full working printer :-)

Two screens are already finished, when they all are ready the nextion hmi and arduino software will be online, all drawings are made by me in Xara X, top graphical program.
You can support us by giving a 'like' on this project.
Thanks,

Danny

Bezel7.stp

Bezel for Nextion 7" screen Step file

stp - 66.94 kB - 06/13/2020 at 16:20

Download

bezel7.stl

Bezel for Nextion 7" screen

Standard Tesselated Geometry - 462.00 kB - 06/13/2020 at 16:18

Download

View project log

Enjoy this project?

Share

Discussions

Elif Hale Gokcen wrote 03/09/2021 at 19:05 point

Could you share HMI file of nextion interface? that'd be amazing.

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates