Close

Third Live Stream!

A project log for Serpano

A CircuitPython dev board designed for breadboards! With adjustable voltage rail, multiple GPIOs and a 1.3" 240x240 LCD.

arturo182arturo182 07/20/2020 at 19:460 Comments

The solder party is not stopping until the board is working! 

Make sure to join Part 3 of the Serpano solder saga as we solder and bring-up the MCU and hopefully get UF2 and CircuitPython working.

The stream starts on July 21st at 8PM CEST (~22h from when this is posted).

Discussions