BioAmp v1.5

Single chip biopotential amplifier.

Deepak Khatri

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Public Chat

Similar projects worth following

View Gallery

Public Chat

Starting from

$19.99

Buy on Tindie

lorkhatri has 237 orders / 1reviews

Ships from India

Description

BioAmp v1.5 is a single chip Bio-potential amplifier for recording any Bio-potential signal non-invasively. It's compatible with Backyard Brains Spike Recorder, which you can use to record and visualize all the Bio-potential signals.

Details

A short demo of BioAmp v1.5

Intro to BioAmp v1.5

Assembly Guide

Components

1 × BioAmp v1.5 PCB
1 × TL074 Amplifier and Linear ICs / Operational Amplifiers
6 × 10k 1% Resistor
2 × 220k 1% Resistor
2 × 100k 1% Resistor

View all 16 components

Build Instructions

Collapse

1

Blank PCB

Order the BioAmp v1.5 Kit from Tindie and you'll receive a PCB just like shown below.

This PCB is the starting point of our build, solder components as per the instructions below to get your own BioAmp v1.5 ready to record BioPotential signals. Keep this interactive BOM link handy to help you with the build process.
2

Resistor 1k

We will start with all the resistors first, for this step you solder a 1k resistor at R11 as shown in the interactive BOM. The image below shows the exact placement.
3

Resistor 10k

Solder 6 x 10k resistors at R1, R2, R5, R6, R7, and R8.