Close
0%
0%

PCIe x4 to M.2 M-Key 2280 adapter

High-performance PCIe x4 (64P) to M.2 M-Key 2280 NVMe adapter.

Public Chat
Similar projects worth following
High-performance PCIe x4 (64P) to M.2 M-Key 2280 NVMe adapter.

4-layer PCB, impedance control (85 Ohm) and length matching.

Enjoy this project?

Share

Discussions

Mirko wrote 01/18/2022 at 18:43 point

Please lool for document: 

PCI Express Card Electromechanical Specification Revision 2/3/4.

  Are you sure? yes | no

Mirko wrote 01/18/2022 at 18:40 point

No it not necessary to lenth match between thw diff pairs, I have bad habbits from other high speed interfaces :-) don't do this way as me :)

  Are you sure? yes | no

benjaminaigner wrote 01/18/2022 at 10:22 point

Hi Mirko,

I really like your PCIe designs and I think they can guide me with some of my attempts.

A short question regarding the length tuning of the PCIe lanes:

Is it necessary to length-match all 4 lanes?

According to a PCIe spec I found (it's hard to find good information with being a PCI-SIG member) the inter-lane length matching is not critical.

But I understand: better safe than sorry :-)

Greetings

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates