• 1
    Rainbow Lamps - Wireless Synchronized Lamps

    Rainbow Lights are ESP32-C3 based RGB lamps which are synchronised using ESP-Now Communication Protocol. The Lamps are designed in #fusion360 and 3D printed in #ender3. #Adafruits 16LED Neopixels rings are used in these lamps.

    The basic functionality of these lamps is to be in wireless sync and change the colours according to the program. So currently I have programed them in two modes:

    Mode 1: When we touch any one coloured lamp, all the lamps glow in that colour, stay for 2 seconds and go back to their original colour.

    Mode 2: In second mode the colour we touched stays as long as power shutdown or unless we touch any other lamp.

    We can use this lamps as Childrens Play Lamps, Mood Lamps, Photo/Videography, Background fill lights and more.....

    Thank You NextPCB:

    This project is successfully completed because of the help and support from NextPCB. NextPCB is one of the most experienced PCB manufacturers in Global, has specialized in the PCB and assembly industry for over 15 years. Not only could NextPCB provide the most innovative printed circuit boards and assembly technologies in the highest quality standards, the fastest delivery turnaround as fast as 24 hours.

    Guys if you have a PCB project, please visit their website and get exciting discounts and coupons.

    Only 0$ for 5-10pcs PCB Prototypes：Nextpcb.com/pcbprototype

    Register and get $100 from NextPCB: Nextpcb.com/coupon

  • 2
    Supplies

    To get high-quality electronic components at an extremely low cost, hqonline.com is the perfect site. They have labels from all the international brands, so you can find the best components for your device without spending a lot of money. This offers you the best value for your money.

  • 3
    3D Design