Close

Board etched

A project log for Hakko 907 based Soldering Station

A soldering station based on the easy to source Hakko 907 soldering iron, which is a 24V 50W soldering iron with integrated thermistor.

kuroKuro 11/29/2014 at 01:070 Comments

Went to college today and the projects room heat press was dead. Asked a professor and he let me use the heat press on his lab.

Transferred the toner and etched it at college:

At home, I applied kind of a solder mask. It's actually a UV paint for purposes other than protecting PCBs.

I have already drilled it, and will start assembling it soon.

Discussions