Close
0%
0%

1GHz DDS, SMD64

1GHz DDS based on AD9912 in 64 pad Stamp Style

Similar projects worth following
  • 1 × AD9912 Data Converters / Digital to Analog Converters (DACs)

Enjoy this project?

Share

Discussions

matseng wrote 08/03/2015 at 16:43 point

I see.  Are the pads castellated and manufactured by any of the regular Chinese cheap pcb fabs?   Is so, how do you specify the castellation in the layout software?

  Are you sure? yes | no

Antti Lukats wrote 08/03/2015 at 16:52 point

no china fab, no :) EU fab, has "cut hole" as standard offering. They do not like to do this, but they do.

But taiwan fabs make this also, no questions asked, even with V-scoring :) ok with 100mil and 1.0mm PCB was V-scored holes pretty ok!

  Are you sure? yes | no

matseng wrote 08/03/2015 at 06:44 point

With that many pads it could be a breakout board for the chip itself. ^_^   I guess that just a few of them are actually connected to something?

  Are you sure? yes | no

Antti Lukats wrote 08/03/2015 at 16:11 point

This mod was part of SMD64 series that all share same footprint and loosely agree on placement on digital and analog in outs. For this module many pads are no connect.

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates