Project Logs

Collapse

• Screen test

  SrBlonde • 05/20/2024 at 08:42 • 0 comments

• New Sketch

  SrBlonde • 05/16/2024 at 12:31 • 0 comments

• NEW LOGO :)

  SrBlonde • 05/14/2024 at 09:13 • 0 comments

• Controller test

  SrBlonde • 05/11/2024 at 20:17 • 0 comments

  All right!!

• LOGO PROJECT

  SrBlonde • 05/09/2024 at 06:29 • 0 comments

• New concept

  SrBlonde • 05/08/2024 at 11:23 • 0 comments

  New concept. Two displays. One side circular an the opposite side 16:9 4"

• Last test lens and choice of controller

  SrBlonde • 05/06/2024 at 16:05 • 0 comments

  Finally I'm going to use two 75mm lenses superimposed at a distance of a couple of cm. I am waiting to receive a remote control type that mobile phones use to connect to the Raspberry Pi via USB.

  https://a.aliexpress.com/_EH19WqT

• Test with the output sound

  SrBlonde • 05/03/2024 at 18:06 • 0 comments

  As sound output I am going to use a USB-3.5 minijack converter connected to the Raspberry Pi3. The mini Jack installed on the unit itself causes a lot of interference. I have followed the tutorial in this video to configure the USB output before that of the card itself.

  Retropie user: Pi

  Psw: Raspberry 

  Commands: view the video

  Remember reboot the pi3 after the save the file

  I used to the test this product 

  Usb-mini jack 3.5 female
  

• Lens tests

  SrBlonde • 05/03/2024 at 11:12 • 0 comments

  I have been trying another lens with higher magnification, but the result is still outside my expectations.

  Lens 110mm x10

• Failed lens test

  SrBlonde • 04/22/2024 at 08:57 • 0 comments

  I bought this lens to see its effect and even though it appears in the product description x10. I have to move the lens too far away so that it covers the entire diameter. I have to try another one

  Lens x10 75mm

View all 15 project logs