rod holderc.stlMagnet sensor and recharge rod holdersla - 447.15 kB - 08/03/2016 at 21:38 |
|
|
123dx - 80.33 kB - 07/13/2016 at 15:26 |
|
|
sla - 15.09 kB - 07/13/2016 at 15:25 |
|
|
123dx - 34.88 kB - 07/13/2016 at 15:25 |
|
|
homing test stand.stlAdapter for 1 x 2 wood to homing beaconsla - 16.59 kB - 07/13/2016 at 15:25 |
|
|
123dx - 64.18 kB - 07/13/2016 at 15:25 |
|
|
sla - 3.05 kB - 07/13/2016 at 15:25 |
|
|
ino - 2.92 kB - 07/05/2016 at 19:41 |
|
|
- 4.85 kB - 07/05/2016 at 19:44 |
|
|
- 5.00 kB - 07/05/2016 at 19:43 |
|
|
sla - 2.48 MB - 07/05/2016 at 19:40 |
|
|
sla - 974.57 kB - 07/05/2016 at 19:40 |
|
|
sla - 39.59 kB - 07/05/2016 at 19:40 |
|
|
123dx - 43.84 kB - 07/05/2016 at 19:40 |
|
|
123dx - 67.68 kB - 07/05/2016 at 19:40 |
|
|
123dx - 62.27 kB - 07/05/2016 at 19:40 |
|
|
mato_july04.inoEyelid height on open reducedino - 4.04 kB - 07/04/2016 at 23:28 |
|
|
Pixy_detect0630.inoImproved "tell Mato where the color is"ino - 2.09 kB - 06/30/2016 at 14:02 |
|
|
Pixy_detect0629.inoTell Mato where the color isino - 2.09 kB - 06/29/2016 at 20:24 |
|
|
mato_june29.inoRespond to Pixy camera inputino - 4.04 kB - 06/29/2016 at 20:23 |
|
|
Pixy_detect.inoCode to enable Pixy to detect left, right, center of an objectino - 2.07 kB - 06/25/2016 at 21:40 |
|
|
pixy bkt2.stlTest bracket for Pixy camerasla - 16.28 kB - 06/25/2016 at 21:40 |
|
|
caster base large.stlLarge caster base for heavy loadsla - 227.33 kB - 06/24/2016 at 22:40 |
|
|
farad 9k end.stl9000 farad end piecesla - 1.60 MB - 06/20/2016 at 20:24 |
|
|
switch holder.stlswitch bracket for 9000 farad assemblysla - 353.18 kB - 06/20/2016 at 20:24 |
|
|
farad bottom.stl9000 farad bottom piecesla - 322.55 kB - 06/20/2016 at 20:24 |
|
|
farad top.stl9000 farad top piecesla - 22.32 kB - 06/20/2016 at 20:24 |
|
|
123dx - 58.26 kB - 06/20/2016 at 20:24 |
|
|
123dx - 68.54 kB - 06/20/2016 at 20:24 |
|
|
123dx - 35.07 kB - 06/20/2016 at 20:24 |
|
|
123dx - 40.76 kB - 06/20/2016 at 20:24 |
|
|
antenna_test.inoFour inches of twisted wire between A0 and Gnd. can be used to detect humans.ino - 859.00 bytes - 05/25/2016 at 00:24 |
|
|
ino - 4.98 kB - 05/19/2016 at 19:58 |
|
|
caster ball.stlPrint at 155% enlarged size for large basesla - 5.18 MB - 05/19/2016 at 16:29 |
|
|
sla - 163.07 kB - 05/19/2016 at 16:29 |
|
|
sla - 898.38 kB - 05/19/2016 at 16:29 |
|
|
sla - 511.78 kB - 05/19/2016 at 16:29 |
|
|
sla - 165.58 kB - 05/19/2016 at 16:29 |
|
|
123dx - 86.47 kB - 05/19/2016 at 16:29 |
|
|
123dx - 49.96 kB - 05/19/2016 at 16:29 |
|
|
sla - 254.29 kB - 05/19/2016 at 16:29 |
|
|
123dx - 67.71 kB - 05/19/2016 at 16:29 |
|
|
123dx - 53.22 kB - 05/19/2016 at 16:29 |
|
|
123dx - 35.62 kB - 05/19/2016 at 16:29 |
|
|
sla - 258.67 kB - 05/19/2016 at 16:29 |
|
|
sla - 67.50 kB - 05/19/2016 at 16:29 |
|
|
sla - 159.65 kB - 05/19/2016 at 16:29 |
|
|
123dx - 57.50 kB - 05/19/2016 at 16:29 |
|
|
sla - 165.13 kB - 05/19/2016 at 16:29 |
|
|
sla - 178.14 kB - 05/19/2016 at 16:29 |
|
|
123dx - 43.38 kB - 05/19/2016 at 16:29 |
|
|
sla - 197.15 kB - 05/19/2016 at 16:29 |
|
|
sla - 168.41 kB - 05/19/2016 at 16:29 |
|
|
123dx - 69.76 kB - 05/19/2016 at 16:29 |
|
|
sla - 136.00 kB - 05/19/2016 at 16:29 |
|
|
sla - 61.70 kB - 05/19/2016 at 16:29 |
|
|
123dx - 72.67 kB - 05/19/2016 at 16:29 |
|
|
123dx - 52.02 kB - 05/19/2016 at 16:29 |
|
|
little_friend_nsewb.inoThis code improves the "found obstacle" sectionino - 2.88 kB - 05/01/2016 at 18:10 |
|
|
little_friend_nsewa.inoThis code enables Mato to find the cardboard "home" box.ino - 2.77 kB - 04/14/2016 at 19:01 |
|
|
little_friend_sketch.inoBasic "bump and go" sketch for Arduinoino - 1.39 kB - 03/29/2016 at 13:31 |
|
|
wheel.stlWheel--two neededsla - 1.12 MB - 03/29/2016 at 13:28 |
|
|
ultracap holder.stlHolds 5 capacitors and a switchsla - 1.52 MB - 03/29/2016 at 13:28 |
|
|
body.stlPlace to secure the motor mountssla - 761.32 kB - 03/29/2016 at 13:28 |
|
|
Arduino holder.stlTray to hold Arduino and Motor Shieldsla - 176.94 kB - 03/29/2016 at 13:28 |
|
|
ultracap holder design.123dxDesign file123dx - 82.78 kB - 03/29/2016 at 13:28 |
|
|
wheel design.123dxDesign file123dx - 57.08 kB - 03/29/2016 at 13:28 |
|
|
body design.123dxDesign File123dx - 66.45 kB - 03/29/2016 at 13:28 |
|
|
Arduino holder design.123dxDesign File123dx - 62.86 kB - 03/29/2016 at 13:28 |
|