Quantity   Component name
1 × UPDATE new component list coming soon
4 × M4 x 30 Cap screws for securing cuvette holder and collimator tube assembly
1 × FIXED cuvette holder W/25mm filter holder Dimensions: 64.00 x 54.00 x 41.00 mm Material: SLS (Plastic), Nylon PA11 (Black), Polished, Black
1 × Wood Block cut at 45 degree angle Used to mount CMOS camera with Gorilla 2 sided tape
1 × Project Box ( black ) cost 7.95 Dimentions 190mm X 109mm X 55mm
1 × Electrical Tape 1 roll cost 2 for 1.29
1 × Felt Guard Pads 1" Dia. round type set of 4 for 3.79
16 × M4 Washers & M4 nuts
1 × Ø25.4mm Concave Mirror, f=100.0mm, -E02 Dielectric Coated Focusing mirror 400 - 750nm /Thorlabs focusing mirror CM254-100-E02
1 × 1.0in Metric Pitch Flexure Mirror Mount PFM1/M Thorlabs mirror mount
1 × M4 Cap Screw Kit HW-KIT1/M / $55.20 USD
1 × 100um Wide Slit, Mounted S100R / $93.70 USD
1 × ELP-USBFHD01M-L21(2.1mm lens) 2Megapixel 1080P HD USB board camera $45.99
1 × Cuvette Holder Dimensions; 45 X 45 X 25 mm / 3D-printed by Sculpteo
1 × 32mm lens holder W 25mm inlay filter rear side (Meshed) Width 37.8mm Height 49.0mm Depth 37.8mm