Close

PICDEMO Firmware

A project log for WICE-4M

Leap Electronics WICE-4M EPROM Emulator Reverse Engineered

forthnutterforthnutter 10/19/2017 at 08:080 Comments

PIC 18 on the demo PCB is coming along very slowly.

I have created routine to Open WICE RAM A or RAM B for that 16 bit feature.

Then a routine to dump bytes to RAM when open.

Still need to work out how to do ROM profile setting on one of the latches.

A routine to Close off WICE RAM so as to allow access to external ROM interface.

Might start looking at designing PCB, thats if the MCU is still available.

Discussions