Module4014_v2.1.brd

Eagle v5.7 Board file for v2.1. (for LEDs with reverse protection diodes)
@al1 found a blunder in rev2.0 (one reverse LED), this is corrected here

brd - 27.35 kB - 09/13/2016 at 23:07

Download

VID_20160906_191939.3gp

Demo video of the first 3 working units (rev0)

3gpp - 4.59 MB - 09/06/2016 at 18:53

Download

4014_LED_mini.hex

HEX file of al1's AVR test program for rev0. For ATmega328P (Arduino Nano D2-D8 segments D9 common pin, just plug your 4014 model next to Arduino nano on breadboard)

hex - 3.75 kB - 09/06/2016 at 16:01

Download

4014LED.c

al1's AVR test program for rev0. (With little changes also for rev2)

x-csrc - 7.57 kB - 09/06/2016 at 16:00

Download

main.c

al1's AVR test program for rev0. (With little changes also for rev2)

x-csrc - 1.81 kB - 09/06/2016 at 16:00

Download

font.h

al1's AVR test program for rev0. (With little changes also for rev2)

h - 3.40 kB - 09/06/2016 at 16:00

Download

4014LED.h

al1's AVR test program for rev0. (With little changes also for rev2)

h - 718.00 bytes - 09/06/2016 at 16:00

Download

Module4014_rev0.brd

Eagle v5.7 board file (V.0: no protection diode)

- 29.32 kB - 08/17/2016 at 18:52

Download