PROSTHETIC_HAND_HARD_PARTS.stlThese are the hard 3D printed parts for the actual hand prototypeStandard Tesselated Geometry - 6.86 MB - 05/08/2018 at 22:29 |
|
|
INTERNAL_MOLD.stlThis is one of a three piece mold for casting the prosthetic hand silicone skin.Standard Tesselated Geometry - 4.36 MB - 05/08/2018 at 22:29 |
|
|
3DSCAN_HAND.stlThis is a slightly modified version of the original hand 3D Scan the mold is based on. I'm posting the raw scan in the GitHub repository for this project.Standard Tesselated Geometry - 4.82 MB - 05/08/2018 at 22:29 |
|
|
BOTTOM_MOLD.stlThis is one of a three piece mold for casting the prosthetic hand silicone skin.Standard Tesselated Geometry - 2.43 MB - 05/08/2018 at 22:29 |
|
|
SILICONE_SKIN_HAND_BATTERY_AND_ACTUATOR_ENCLOSURE.stlThis enclosure fits a Firgelli linear actuator and two 18650 size 3.7v rechargeable batteriesStandard Tesselated Geometry - 39.44 kB - 05/08/2018 at 22:29 |
|