-
1get materials
4x peizo sensors + breakout boards
1x arduino - preferably leonardo
1x pair slippers
4x wire connectors to make life easier4
-
2install sensors into shoes
install peizo sensors into the rubber portion making slits to slide the sensors into, connect it up. (make sure to pick a nice spot where the shoes do not bend much.
-
3wire everything up.
connect the midi inputs to the analog pins of the arduino.
-
4get midi feedback from serial port.
on arduino leonardo you can create a usb interface to send messages as a device, otherwise console feedback can be used.
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.