PhillyFlyers
T962A_Controller_V3.5_Schematic.jpgversion 3.5 schematic (jpg format)*** Added NOTES for proper backlight setup for 5.0" & 7.0" LCDs *** JPEG Image - 4.64 MB - 10/05/2019 at 21:58 |
|
|
T962A_TFT_User_Guide.pdfCurrent user guide (not yet complete), keeping it up here as well on github, so anyone wanting a quick glance can open this up for reference...Adobe Portable Document Format - 5.74 MB - 09/08/2019 at 13:05 |
|
|
top_1.jpgPhoto of assembled board, top... showing finished board(note: a few capacitors were left off when photo was taken) JPEG Image - 1.42 MB - 08/08/2019 at 23:03 |
|
|
bottom_1.jpgPhoto of assembled board, bottom... showing installed 'esp32' wifi module..JPEG Image - 1.17 MB - 08/08/2019 at 23:02 |
|
|
BOARD_PIC2.jpg2nd Pic of PCB installed in ovenJPEG Image - 3.20 MB - 05/28/2019 at 11:29 |
|
|
BOARD_PIC1.jpgPic of PCB installed in ovenJPEG Image - 2.84 MB - 05/28/2019 at 11:29 |
|
|
T962A Controller with 5"/7" Touch TFT (*STM32*)
T962A Controller Drop-In (using *STM32H7*) This is a drop-in replacement controller board for the T962A reflow oven, using the STM32H7