sbaseloader.binThe Lerdge-S base loader (if you brick your board and are comfy finding SWD, this would let you reset it).macbinary - 58.79 kB - 06/17/2020 at 16:08 |
|
|
lerdgexboot1.0.2.patched.binPatched bootloader that does not reset security bits on startup. Must be loaded directly with an ST-link, will not load correctly through the lerdge X boot updateroctet-stream - 64.00 kB - 01/10/2019 at 18:33 |
|
|
ST7796S.pdfThis appears to be the LCD controller - most of the commands match up to what we see in the code.Adobe Portable Document Format - 3.40 MB - 01/09/2019 at 18:28 |
|
|
resetlerdge.shscript to call and then flash. Be sure to adjust paths as appropriate.x-sh - 288.00 bytes - 01/03/2019 at 16:16 |
|
|
lerdge_program.cfgopenocd script for resetting.cfg - 312.00 bytes - 01/03/2019 at 16:15 |
|
|
lergdekloader.binThis is the base bootloader from a lerdge-K system.macbinary - 64.00 kB - 12/19/2018 at 19:41 |
|
|
lerdgebaseLoader.binThis appears to be what exists at 0x8000000 on lerdge X boards.macbinary - 128.00 kB - 12/09/2018 at 21:05 |
|
|
lerdgedecrypt2.pyNow supports encryption and decryption of lerdge firmware.x-python-script - 4.44 kB - 12/06/2018 at 15:37 |
|