Quantity | Component name | |
1 | × | Arduino Uno |
1 | × | LCD screen |
1 | × | piece of 8½ inch x 4in x ⅛ in wood for lid of the box |
2 | × | pieces of 4 in x 4 in x ¼ in wood For short sides of the box |
2 | × | pieces of 8 in x 4 in x ¼ in wood For long sides of the box |
1 | × | Box Cutter (or other way to cut wood) |
1 | × | Wood glue/gorilla glue |
1 | × | Tape or clamps For holding box together while gluing |
1 | × | Breadboard(s) |
1 | × | 10k ohm Potentiometer |
2 | × | 220 ohm Resistor Only one needed for arcade push button |
1 | × | Push button 2-pin arcade push button or 4-pin button |
2 | × | Alligator clips (if using an arcade push button) |
32 | × | Jumper wires |
1 | × | battery/power source for Arduino |
1 | × | piece of 8½ inch x 4in x ¼ in wood for base of the box |