Schematic Prints.PDFCircuit Diagram of the boardAdobe Portable Document Format - 1.26 MB - 12/12/2019 at 17:48 |
|
|
Board Dimensions.PDFMechanical dimensions of the board.Adobe Portable Document Format - 339.83 kB - 12/12/2019 at 17:56 |
|
|
Board Assembly.PDFAssembly instruction of the board. Very useful when placing the componentsAdobe Portable Document Format - 186.85 kB - 12/12/2019 at 17:56 |
|
|
BOM Complete.xlsxComplete Excel BOMsheet - 35.68 kB - 12/12/2019 at 17:50 |
|
|
BOM Basic.xlsBOM to be used to be uploaded on Mouser or DigiKey to fill the cartms-excel - 16.50 kB - 12/12/2019 at 17:50 |
|
|
SCP-PI-B-4L.zipGerber files for the FOUR layers version. Zip file to send directly to the PCB fabricatorZip Archive - 123.27 kB - 12/12/2019 at 17:55 |
|
|
SCP-PI-B-2L.zipGerber files for the TWO layers version. Zip file to send directly to the PCB fabricatorZip Archive - 115.79 kB - 12/12/2019 at 17:55 |
|
|
SuperCaps UPS Firmware.zipFirmware for the ATTiny25 developed in PlatformIO, but it can be compiled on any platform.Zip Archive - 457.36 kB - 12/12/2019 at 18:20 |
|
|
On-Off-Switch-Simulations.zipPSpice circuit of the Soft Latching Power Switch in Microcap12Zip Archive - 8.25 kB - 12/13/2019 at 10:45 |
|
|
Board 3D.stepStep file of the boardstep - 6.62 MB - 12/12/2019 at 17:49 |
|
|
Board 3D.PDF3D pdf of the board to be opened with Adobe AcrobatAdobe Portable Document Format - 1.93 MB - 12/12/2019 at 17:49 |
|
|
Case Pi 3Bplus SCP-B.stepSTEP file of the whole case for Raspberry B3+ and SuperCap UPSstep - 22.51 MB - 12/12/2019 at 18:09 |
|
|
Case Bottom Pi 3Bplus SCP-B.stlSTL file of bottom case for Raspberry B3+ and SuperCap UPSStandard Tesselated Geometry - 1.18 MB - 12/12/2019 at 18:08 |
|
|
Case Top Pi 3Bplus SCP-B.stlSTL file of top case for Raspberry B3+ and SuperCap UPSStandard Tesselated Geometry - 609.85 kB - 12/12/2019 at 18:08 |
|