Low cost solder paste dispenser

Back to overview

Easy to build but very capable and handy DIY solder paste dispenser built mostly from cheap Ebay components and modules.

kevarek

1

Prepare syringe holder and piston assembly
2

Assemble piston
3

Assemble syringe holder
4

Assemble motor and shaft bearings to chassis fixture
5

Connect the syringe with a motor via body
6

Mount motor cover
7

Print and paint the control box
8

Print the buttons and its mounting plate
9

Mount the buttons, connectors, switches and electronics
10

Upload firmware and enjoy

Discussions