8 |
× |
2" x 8" x 10' pressure treated lumber
Joists for the wall, kicker board and side supports
|
4 |
× |
2" x 8" x 8' pressure treated lumber
Bottom and top plates for wall and kicker
|
1 |
× |
Holds Set
This is somewhat of a personal preference. We went with a 40 piece Metolius Foundation Hold Set.
|
1 |
× |
Paint
If you wanna' paint it, you need paint.
|
3 |
× |
3/4" x 4' x 8' ppressure treated plywood
|
5 |
× |
4" x 4" Steel Square Door Hinge
Between kicker board and wall
|
8 |
× |
Bolts, Washers and Nuts
Bolts, washers and nuts hold the main sections together. Our build used BIG ones because the wife was a bit worried.
|
1 |
× |
Box of 2 3/4" screws
For wall boards
|
1 |
× |
Box of 3" deck screws
For framing
|
200 |
× |
T-Nuts
Outdoor-rated T-nuts. You need about 200 to fill the entire board. Best to buy in bulck on Amazon
|
50 |
× |
Climbing Hold Bolts
Bolt on holds need bolts. Length depends on the holds you get. They need to match the T-Nuts. You should get outdoor rated stainless.
|