Quantity   Component name
1 × Minitronics V2.0 3D printer pcb with oneboard stepper drivers and end switch connection, arduino compatible
1 × NEMA 23 Used for the x-axis
1 × 4-way solenoid water valve You can buy on any of the Chinese platforms
1 × RPLidar A1 Lidar sensor
1 × 125 mm drainage pipe Only 1 meter
3 × T-part of 125mm drainage pipe For the arms and the base
1 × Kill switch For switching on/off everything
1 × DC/DC converter 12V > 5V
1 × 4-channel relay board to switch water valves
1 × Silicone hose for water supply Around 3,5 meter
2 × Bearings 8mm
1 × A lot of screws and nuts......
1 × NEMA 17 Uuser for the y-axis
2 × Motor mounts Mount for the nema 17 and a mount for the nema 23
1 × Lead screw 8mm for the x and y axis
1 × Laster cutted plastic For the cover
1 × Aluminium extrusion profile For the base frame
2 × 9mm gt2 belt 200mm don't use the 6mm height, this is too weak
2 × 60t, 9mm belt, gt2, 8mm hole size pulley Will be mounted on both of the 8mm axis
1 × 20t, 6.35mm hole size, gt2 pulley, 9mm belt size For mounting on the NEMA 23
1 × 20t, 8mm hole size, gt2 pulley, 9mm belt size Will be mounted on the 8mm axis
1 × TB6600 stepper driver High current driver used for the NEMA 23