• 1
    Collect the Essentials

    So here is what you will need:

    • A standard servo motor(Plastic gear one is recommended since the mechanics of the servo motor will be unused.)
    • A screwdriver
    • A diagonal cutter
    • Some M-M jumper wires
    • A power feeder track(Use a suitable gauge of track that you have, I use N-gauge tracks)
    • Some F-F jumper wires
  • 2
    Take Apart the Servo Motor

    Unscrew the bottom cover of the servo motor to reveal the driver board inside.

  • 3
    Disconnect the Motor Wires