Instructions | Loud ESP

1

How to flash and configure ("ESP Audio Duo", "HiFi-ESP" and "Louder ESP" supported) using nothing but browser

Use Squeezelite-ESP32 installer to flash firmware first.
2

Use Generic/I2S profile
3

Connect device to USB port and select if from the list
4

Press Flash and wait around 2 minutes
5

(Optional) You may enter serial console to get more information
6

Configure device's Wifi

Device is in recovery mode. Connect to squeezelite-299fac wifi network with squeezelite password (your network name suffix will be different)
7

When redirected to captive portal let device scan wifi network and provide valid credentials
8

You can use provided IP address (http://192.168.1.99/ on the screenshot) to access settings page
9

Configure hardware

Navigate to Hardware section and provide following updates in the DAC Options DAC model: I2S Clock GPIO: 26 Word Select GPIO: 25 Data GPIO: 22 Press Save button
10

(Optional) You may change device names to something close to you heart

Loud ESP