-
1Cut Body
Use Cellerator_Sheet_Metal_Drawing.pdf to cut 1/32 steel sheet
-
2Fold Sheet Metal
Use metal break to fold steel on dotted line marked on Cellerator_Sheet_Metal_Drawing.pdf
-
3Drill Holes
Using an xxx drill bit drill hole marked on Cellerator_Sheet_Metal_Drawing.pdf.
-
4Deburr and Sand
Using a deburr tool clear out any sharp edges, and share threads. Use sand paper to rough the metal and remove any surface rust.
-
5Paint
Remove all oil from the metal using xxx. Let dry for xxx minutes. Using Rustoleum prime the metal. Let dry xxx minutes. Using a roller brush, coat all surfaces with paint and let dry for 30 minutes, repeat for a total for 3 coats.
-
63D Print
X-axis_motor_mount.stl
Y-axis_idler_mount.stlY-axis_motor_mount.stl
Z-axis_gantry_mount.stl
Z-Axis_motor_mount.stl
ToolMount_V2.stl
-
7Cut Tracks
For the x-axis and z-axis track cut 3 (three) aluminum t-slot tracks to 400mm.
For the y-axis track cut 2 (two) 5mmXXX chrome rods to 400mm.
-
8Assemeble controller box
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.