PE450.maxSourcefiles for standard 3D-printer with 20x20x20cm build volume.max - 9.66 MB - 10/05/2020 at 12:23 |
|
|
PE450.FBXSourcefiles for standard 3D-printer with 20x20x20cm build volume.fbx - 4.69 MB - 10/05/2020 at 12:22 |
|
|
PE450.objSourcefiles for standard 3D-printer with 20x20x20cm build volume.obj - 4.17 MB - 10/05/2020 at 12:22 |
|
|
PE450 - For big printers.maxSource-files for 3D-printers with big build volumemax - 2.35 MB - 10/05/2020 at 13:52 |
|
|
PE450 - For big printers.FBXSource-files for 3D-printers with big build volumefbx - 2.15 MB - 10/05/2020 at 13:52 |
|
|
PE450 - For big printers.objSource-files for 3D-printers with big build volumeobj - 926.60 kB - 10/05/2020 at 13:52 |
|
|
PE450 - Wing (1).STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 47.54 kB - 10/04/2020 at 15:46 |
|
|
PE450 - Wing (2).STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 9.46 kB - 10/04/2020 at 15:46 |
|
|
PE450 - Wing (3).STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 18.64 kB - 10/04/2020 at 15:46 |
|
|
PE450 - Wing (4).STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 12.39 kB - 10/04/2020 at 15:46 |
|
|
PE450 - Wing (5).STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 31.14 kB - 10/04/2020 at 15:46 |
|
|
PE450 - Generator Top 1.STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 154.57 kB - 10/04/2020 at 15:51 |
|
|
PE450 - Generator Top 2.STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 172.93 kB - 10/04/2020 at 15:51 |
|
|
PE450 - Generator Top 3.STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 170.20 kB - 10/04/2020 at 15:51 |
|
|
Standard Tesselated Geometry - 24.11 kB - 10/05/2020 at 12:08 |
|
|
Standard Tesselated Geometry - 23.71 kB - 10/05/2020 at 12:08 |
|
|
Standard Tesselated Geometry - 24.69 kB - 10/05/2020 at 12:08 |
|
|
Standard Tesselated Geometry - 24.98 kB - 10/05/2020 at 12:08 |
|
|
Standard Tesselated Geometry - 122.35 kB - 10/04/2020 at 15:38 |
|
|
Standard Tesselated Geometry - 57.31 kB - 10/04/2020 at 15:38 |
|
|
Standard Tesselated Geometry - 117.27 kB - 10/09/2020 at 11:39 |
|
|
PE450 - Generator Top 4.STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 154.09 kB - 10/04/2020 at 15:51 |
|
|
PE450 - Mould Quarter.STLFor standard 3D-printer with 20x20x20cm build volume.Standard Tesselated Geometry - 37.00 kB - 10/04/2020 at 15:40 |
|
|
PE450 - Nose Cone.STLFor any 3D-printerStandard Tesselated Geometry - 1006.04 kB - 10/04/2020 at 15:38 |
|
|
PE450 - Coilwinder.STLFor any 3D-printerStandard Tesselated Geometry - 9.46 kB - 10/04/2020 at 15:41 |
|
|
PE450 - Bearing Holder.STLFor any 3D-printerStandard Tesselated Geometry - 45.79 kB - 10/04/2020 at 15:38 |
|
|
PE450 - Generator Top.STLFor 3D-printer with big build volumeStandard Tesselated Geometry - 195.79 kB - 10/04/2020 at 15:38 |
|
|
PE450 - Generator Bottom.STLFor 3D-printer with big build volumeStandard Tesselated Geometry - 69.22 kB - 10/04/2020 at 15:38 |
|
|
PE450 - Blade Full.STLFor 3D-printer with big build volumeStandard Tesselated Geometry - 97.74 kB - 10/04/2020 at 15:38 |
|
|
PE450 - Mould Full.STLFor 3D-printer with big build volumeStandard Tesselated Geometry - 126.45 kB - 10/04/2020 at 15:43 |
|