Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
There are 4 sides with red,yellow,blue,green leds and 2 sides with LDRs as switch sensor
It's programmed with 3 modes.
Touch both LRDs and mode 1 starts
Mode 1: touch a side pannel and a led turns on release the pannel led turns off
Touch the top side and the blue led side = start mode 2
Mode 2: touch a side pannel and led stays on till all sides are touched , mode 3 starts
Mode 3: a random side led turns on. Press this side and the led goes off, randomly and other turns on.
test_Touch.rarEAGLE (6.1.0) filesRAR Archive - 14.72 MB - 04/28/2024 at 15:59 |
|
|
|
ino - 9.16 kB - 04/28/2024 at 15:44 |
|
|
rigid-new.rarNote!: controller is mirrored upside downRAR Archive - 700.82 kB - 04/28/2024 at 15:40 |
|
|
flex-rigid_gerbers.rarNote!: controller is mirrored upside downRAR Archive - 704.25 kB - 04/28/2024 at 15:40 |
|
It won't do anything when it's turned off and not connected to any usb power cabled that's plugged in a charger on the power grid.
A beauty it is, thanks!
There are 4 sides with red,yellow,blue,green leds and 2 sides with LDRs as switch sensor
It's programmed with 3 modes.
Touch both LRDs and mode 1 starts
Mode 1: touch a side pannel and a led turns on release the pannel led turns off
Touch the top side and the blue led side = start mode 2
Mode 2: touch a side pannel and led stays on till all sides are touched , mode 3 starts
Mode 3: a random side led turns on. Press this side and the led goes off, randomly and other turns on.
TechSpiderbot
Subhajit
Jason
Electroniclovers123
Alex
Looks cool. But what does it do?