Quantity   Component name
1 × Matek Systems F7xx-WING, F405-WING, or mRo PixRacer Pro ArduPlane-compatible Flight Controller with 3 Motor, 4 Servo Outputs
1 × R/C Receiver 8+ Channel, SBUS or PPM Output
3 × Electronic Speed Controller (ESC) At least 4s, 40A with DSHOT. Example: EMAX Formula Series 32Bit 45A ESC
2 × 2207, 2306 or equiv. ~2500KV BLDC Motor Bell diameter under 29mm. Example: T-Motor VELOX V2 2207 2550Kv
1 × 2207, 2306, or equiv. ~2000KV BLDC Motor Any typical multicopter motor around 2000KV. Example: T-Motor VELOX V2 2306 1950Kv
1 × 4s1300 Lipoly (60C or better) Example: RDQ 14.8V 4S 1300mAh 100C
1 × XT60 Pigtail or equiv. Example: https://www.racedayquads.com/collections/pigtails/products/xt60-pigtail-14awg-3-male-or-female
2 × HS-65HB Servo (or equiv.) Example: https://www.motionrc.com/products/hitec-hs-65hb-very-high-torque-9g-micro-servo
2 × HS-65MG Servo (or equiv.) Example: https://www.motionrc.com/products/hitec-hs-65mg-metal-gear-sub-micro-servo
6 × (opt) Du-Bro SKU#118 Small Nylon Hinge Example: (choose MINI, 11mm width) https://www.racedayquads.com/products/du-bro-nylon-hinge-6-pack?_pos=14&_sid=319d73fc4&_ss=r
1 × M2 or M3 Mounting Hardware Kit (Nuts, Bolts, Standoffs) Example: M3 https://www.racedayquads.com/collections/m3-hardware , M2 https://www.racedayquads.com/collections/m2-hardware
4 × 6-Inch Servo Extension Cable Example: (15cm) https://www.racedayquads.com/products/servo-extension-cable-choose-your-length?_pos=2&_sid=2ff37b79e&_ss=r
1 × Male-to-Male Servo Extension Cable Flight Controller to Receiver PPM/SBUS connection. Example: https://www.motionrc.com/products/100mm-4-male-to-male-servo-lead
4 × 2-56 Link Clevis Four (4) servo arm connections. Example: (can be purchased with the linkage rod) https://www.racedayquads.com/products/du-bro-mini-nylon-kwik-link-on-12-2-56-rod-1pc?_pos=20&_sid=319d73fc4&_ss=r
2 × 2-56 Threaded Linkage Rod, Length>=52mm Example: (can be purchased with the clevis) https://www.racedayquads.com/products/du-bro-mini-nylon-kwik-link-on-12-2-56-rod-1pc?_pos=20&_sid=319d73fc4&_ss=r
2 × (opt) Du-Bro SKU#855 E/Z Links 0.72 (2-56) Clip For securing L-Bends, can replace with Z-bend. Example: https://www.motionrc.com/products/dubro-ez-link-2-56-4-pack
2 × Du-Bro SKU#181 or #190 1/16-inch Ball Link 1/16-inch 2-56 Ball Link and Coupler Pair. Equivalent example: https://www.motionrc.com/products/dubro-1-16-threaded-ball-link?variant=198132138009
2 × 2-56 Fully-Threaded Rod, Length=60mm https://www.motionrc.com/products/dubro-2-56-stainless-steel-fully-threaded-rod-12-305mm
2 × 2-56 Smooth Rod, Length=24mm (Can use a scrap length from the servo linkage rod listed above)
2 × (opt) WS2812 5050 SMD (or equiv. Addressable LED) Soldered with magnet wire, mounted in wingtips. Example: https://www.racedayquads.com/collections/leds/products/24-led-strip-high-density-leds , https://www.amazon.com/WS2812-Channel-Color-Driven-Development-Arduino/dp/B081BBF4R3/ref=sr_1_6?dchild=1&keywords=ws2812+5050+rgb+led&qid=1604533422&sr=8-6
1 × Assorted M4 and M5 Prop Nuts Replace default prop nuts if needed.
1 × 50xx Propeller, Clockwise Rotation Example: DAL Cyclone T5249C Pro Tri-Blade. https://www.getfpv.com/dal-cyclone-t5249c-pro-propellers-set-of-4.html
1 × 50xx Propeller, Counterclockwise Rotation Example: DAL Cyclone T5249C Pro Tri-Blade. https://www.getfpv.com/dal-cyclone-t5249c-pro-propellers-set-of-4.html
1 × 50xx or 60xx Propeller, Counterclockwise Rotation Example: DAL Foldable F6 6048 Tri-Blade. https://www.racedayquads.com/collections/6-props/products/dal-foldable-f6-6048-tri-blade-7-prop-4-pack-choose-your-hub-blade-color
1 × Velcro Battery Strap Example: https://www.racedayquads.com/products/lipo-battery-strap-250mm-v3-upgraded-metal-buckle-0-99?_pos=16&_sid=316f4b0b8&_ss=r
1 × (opt) Battery Voltage Monitor / Alarm Buzzer Example: https://www.racedayquads.com/products/1-8s-lipo-battery-voltage-tester-low-voltage-buzzer-alarm?_pos=1&_sid=6e3bacb4d&_ss=r