Jon-
13D Print Case
Print the bottom of the case and the lid in white.
-
2Install components
![]()
Solder wires between the NeoPixels and connect to 3v3, Ground, and D8 on the Wemos. The NeoPixels are rated for and labeled 5v, but will work perfectly fine on 3v.
-
3Attach Lid
![]()
Use 4x M2x6 screws to attach lid.
-
4Upload Program
Connect to computer and flash with BusyLight.ino.
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.