Wireless Tripwire with Machine Vision

Back to overview

A wireless "tripwire" that switch your desktop app when motion is detected

SimonXi

1

Arduino IDE board installation

Add this following line to the "Additional Board Manager URLs",

https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek.com_amebad_index.json

Then install Ameba D package from the board manager
2

Connect Ameba to the OpenMV

Connect pin 9 on Ameba to OpenMV 'P0" pin
3

Upload the code

Use Arduino IDE to upload the code attached here to Ameba

Discussions