Quantity   Component name
2 × Resistor Carbon Film 47k Ohm 1/4 Watt 5%
1 × Resistor Carbon Film 1.2k Ohm 1/4 Watt 5%
3 × Resistor Carbon Film 330 Ohm 1/4 Watt 5%
1 × Resistor Carbon Film 680 Ohm 1/4 Watt 5%
1 × 47uF 50 V Radial Capacitor
1 × 1838 Infrared receiver e.g., VS1838B
1 × 3/4" x 1/8" neodymium disc magnet, axially magnetized, grade N40 or higher e.g. Solarbotics MAG1 (https://solarbotics.com/product/mag1/)
1 × 5mm Common Cathode RGB LED e.g., Amico 5mm round head diffused RGB LED
2 × Pass-Through Headers for Arduino Shields - 1x8
1 × Socket SIPP 3 Pin Machine Tooled Pins Solder Tail e.g. cut from 30-pin Adam Tech SMC-1-30-1-GT
4 × Socket SIPP 2 Pin Machine Tooled Pins Solder Tail e.g. cut from 30-pin Adam Tech SMC-1-30-1-GT
1 × Clock face, hands, clock case, wire, mounting hardware, etc.
1 × 12V, 500mA DC power supply
6 × AA NiMH cells
1 × Diode 1N4002
1 × SPST Pushbutton Switch e.g., E-Switch TL1105-A
1 × Resistor Carbon Film 18 Ohm 1/4 Watt 5% Electronic Components / Misc. Electronic Components
1 × 10 uF 16v radial capacitor
2 × Pass-Through Headers for Arduino Shields - 1x6
1 × Arduino Uno R2 is fine
1 × IR remote control Sparkfun COM-11759 (https://www.sparkfun.com/products/11759)
1 × 0.1uF 50V Ceramic Disc Capacitor
1 × DC power jack to match power supply
1 × Lavet motor quartz clock movement e.g., Quartex Q-80
1 × 8-pin DIP socket
1 × Escapement PCB or Bendulum Clock PCB See Eagle files. The Bendulum clock PCB needs the extra components marked with "+". The escapement PCB does not.
1 × 1mH flat-wound coil Solarbotics CMH (https://solarbotics.com/product/cmh/)
1 × LP2951 Voltage regulator
1 × 6 x AA battery holder
1 × Female header - 1x6
1 × Straight male header - 1x6
1 × Temperature sensor Sparkfun TMP-102