Quantity   Component name
1 × Small microcontroller board I used the Pimoroni Tiny 2040
1 × ELRS nano reciever
1 × Tiny FPV camera I used the Foxeer Pico Razer
1 × Tiny FPV VTX And one you can find that is small enough
2 × 25mm diameter gearmotors I got some from Aliexpress: https://www.aliexpress.com/item/1005002193316118.html
1 × Motor driver I used a TB6612FNG motor driver board, I think it may be underpowered though
1 × Level shifter
1 × 5V voltage regulator
1 × 3D printed parts
1 × Lipo battery I used a 3S 1000mah batt, smaller is also good
1 × Screws and nuts Required screws are specified in the build instructions