Quantity   Component name
1 × 3D printed parts refer to files
1 × Acrylic diffuser sheet no thicker than 2-3mm, for keyboard RGB backlight aperture
1 × Raspberry Pi 4B + SD card of choice
1 × Copper heatsink https://www.aliexpress.com/item/1005001691525070.html (pick 4B Thickness 2mm)
1 × Geekworm x708 v2.0 UPS HAT https://www.aliexpress.com/item/1005001531204651.html (bundle 3 adds necessary battery holder)
1 × Eyoyo 5" TFT display https://www.aliexpress.com/item/1005002828919022.html
1 × KPRepublic BM43A 40% keyboard https://www.aliexpress.com/item/33045346537.html (PCB selection)
43 × Mechanical keyboard switches and key caps Project uses Gateron Yellow
1 × 3 port 1gbit/s ethernet switch https://www.aliexpress.com/item/4001086925334.html (3port1000M1 selection)
1 × Micro usb male breakout https://www.aliexpress.com/item/1005002871824390.html (13mm selection)
1 × HDMI FFC: 15-20cm ribbon, full size HDMI connector, micro HDMI https://www.aliexpress.com/item/4000014554460.html (A3 full size, D3 for micro)
1 × Type-C USB Corner Adapter https://www.aliexpress.com/item/1005004296416819.html (color 2 selection is used in the build)
1 × Power switch with LED 19mm, Red LED color, black shell https://www.aliexpress.com/item/1005004920346156.html
4 × Neodymium magnets 4x2 https://www.aliexpress.com/item/1005002848356452.html
43 × Square 2x3x4mm LEDs - for key underglow Color of your choice, project uses yellow and red from here https://www.aliexpress.com/item/1005004115823489.html
7 × Square 2x3x4mm LEDs - for charging indicator and notification panel 3x green, 1x red, any colors for notifications https://www.aliexpress.com/item/1005004115823489.html
1 × PH2.0 4 pin female terminal to connect power switch with LED to X708, refer to https://wiki.geekworm.com/X708
4 × XH2.54 2 pin female terminals to connect display and battery to X708, refer to https://wiki.geekworm.com/X708
1 × 6x6x5mm mute tact switch for charging indicator, https://www.aliexpress.com/item/4000678700147.html
1 × lithium battery capacity indicator for 1S cell https://www.aliexpress.com/item/1005001840116208.html
1 × M3 Heat set nuts kit 4.5mm outer diameter, length 3-5mm - just get a kit with 20 of each like here https://www.aliexpress.com/item/4001355226745.html
1 × 1/4" "Tripod mount" male/female adapter, 5mm thread length Used to affix monitor and to provide additional mounting point
31 × M3 x 6mm, countersunk head bolt
10 × M3 x 4mm, countersunk head bolt
8 × M2.5 x 1.5-2mm nuts for battery holder and SBC sandwitch
8 × M2.5 thin washers for shimming standoffs
4 × M2.5 x 6mm thread standoff for battery holder rising
6 × M2.5 x 5mm, pan/truss head bolt for battery holder and ethernet switch assembly
1 × M3 x 10-12mm thread, countersunk head bolt for logo cap front
4 × M3 x 10-14mm thread, countersunk head bolt for logo cap holding
4 × M3 x 2-3mm thread, countersunk head bolt for logo cap under-cover
4 × M2.5 x 4-5mm thread, pan head for X708 HAT, usually HAT arrives with a kit of bolts like that
4 × M2.5 x 4mm thread standoff for Pi sandwitch assembly
8 × M2.5 x 5mm thread standoff for Pi sandwitch assembly
2 × M3 x 8mm thread, 5mm Ф pan head for "spine" assembly
2 × M3.5 x 10mm thread, 6mm Ф pan head to affix display to spine and primary case
5 × M2 x 10mm thread, truss head for keyboard
1 × M5 x 12mm thread, 12mm Ф truss head to affix handle with strap holder
2 × M5 nut, 8mm across flats for hinge bolt and strap holder bolt
1 × M5 wing nut for hinge assembly
2 × M5 washer for hinge assembly
2 × M5 x 20mm thread, 8mm across flats hex head bolt for hinge assembly
1 × 3m x 2.5cm nylon strap + accessories accessories - carabiners, half-rings, buckles etc.
1 × Red hockey tape
1 × Micro SD card extender 15cm optional, only if micro SD extension to external part is required https://www.aliexpress.com/item/1005003280141151.html
1 × Cool stickers https://www.aliexpress.com/item/1005002911460437.html
1 × 10-20mm wide painters tape roll for pattern painting
1 × Spray paint primer, pigments, lacquer, your choice
2 × 18650 Li-ion batteries 2000mAh+ from reputable sources of your choice