Instructions | Meteorite Containment

1

Step 1

Buy Meteorite, box, and components. (I had most of mine laying around)
2

Step 2

Print stl's
3

Step 3

Sand, prime, and paint printed parts for a nice finish.
4

Step 4

Bend rods to create the rails.
5

Step 5

Wire the motors and neopixel ring.
6

Step 6

Upload arduino code.
7

Step 7

Attach neopixel and magnet to the printed disc and glue it in place.
8

Step 8

Glue the printed cone and bottom together.
9

Step 9

Use the ring template and cutout the cone hole in the walnut plywood. Also drill out the holes for the rails.
10

Step 10

Drill hole in the back of the box and nibble it to allow the switch to be added.

Meteorite Containment