deltaspring.jarspring centered on origin(0,0) for delta style 3d printersJava Archive - 2.89 kB - 07/05/2023 at 14:00 |
|
|
Spring.java2023 updated source code. Cleaned up by thinking in radians instead of degrees. Read notes for slinky.jar for some more changes.x-java - 4.15 kB - 06/25/2023 at 10:25 |
|
|
slinky.jarNewer code, includes a spiral for priming/adhesion printed at 210 before cooling extruder down to target temp during print. Now asks for zigzag per nozel(assumed 0.4mm) instead of degrees per zigzag recommend starting at 2. Asks for extrusion multiplier instead of fudge factor, multiply old fudge by 2, or start somewhere around 0.8-0.9java-archive - 2.89 kB - 06/25/2023 at 10:09 |
|
|
spring3.jarcurrent iteration of the .jar. removed G29 for compatibility reasons, added offsets for aligning to printable area(go negative to center for a delta, offset of 0,0 will put bottom and leftmost points on zero)Java Archive - 10.55 kB - 03/26/2018 at 16:35 |
|
|
magspring.jarstandalone version of java program. it's a first step towards not needing to compile every time to change parameters."java -jar magspring.jar" for people like me that don't know how to get command line java running. Java Archive - 10.15 kB - 03/10/2017 at 17:57 |
|
|
MagicSpringRev3.javacurrent code, tested, worksJava Source File - 4.99 kB - 03/10/2017 at 13:36 |
|
|
tiny-035.gtiny(ir12.5 or17.5) slinky 1mm layer height .35 fudge factorg - 2.38 MB - 03/10/2017 at 13:25 |
|
|
tiny047-045.gtiny(ir12.5 or17.5) slinky 0.47mm layer height 0.45 fudge factorg - 5.10 MB - 03/10/2017 at 13:25 |
|
|
test-033.gtest print with fudge factor of .33 0.7mm layer heightg - 3.38 MB - 03/10/2017 at 13:25 |
|
|
test-100.gtest print with fudge factor of 1 0.7mm layer heightg - 3.40 MB - 03/10/2017 at 13:25 |
|
|
test-050.gtest print with fudge factor of .5 0.7mm layer heightg - 3.39 MB - 03/10/2017 at 13:25 |
|
|
tiny-045.gtiny(ir12.5 or17.5) slinky 1mm layer height 0.45 fudge factorg - 2.39 MB - 03/10/2017 at 13:25 |
|
|
tiny-055.gtiny(ir12.5 or17.5) 1mm layer height .55 fudge factorg - 2.40 MB - 03/10/2017 at 13:25 |
|
|
MagicSpringrev2.javafixed some error with code, added some commentscode now outputs parameters used at top of gcode file. now uses a calculated extrusion factor multiplied by a fudge factor. Java Source File - 4.98 kB - 03/09/2017 at 16:01 |
|
|
36-40-1-a.ginner radius 36mmouter radius 40mm layer height of 1 getting close to the right dimensions, it's got a lot of flaws, but only one section that fused together. actual printed width is much less than anticipated. g - 6.88 MB - 03/09/2017 at 15:48 |
|
|
auto0.gbad, made with erroneous codeg - 3.93 MB - 03/06/2017 at 16:57 |
|
|
MagicSpring.javaold code DO NOT USE didnt realize i made mistakes when cleaning up code for publication they are fixed in newest version.Java Source File - 3.38 kB - 03/06/2017 at 16:57 |
|