Instructions | WiFi Analyse and Terminator

1

Step 1

Choose a WiFi hotspot from ‘NetStar’ or ‘Nearby WiFi’ or ‘WiFi Distribution’,then goto the page of ‘WiFi Hotspot Detail’.
2

Step 2

As show in Figure 1-1, click Image button ‘Paralyze’.
3

Step 3

Click button ‘agree’ ,then next. As show in Figure 1-2.
4

Step 4

This is a dialog to set duration. Click on the drop-down arrow to select time. And then click ‘confirm’ to paralyze the WiFi hotspot.As show in figure 1-3.

If it works then ImageButton ‘Paralyze’ has changed.As show in figure 1-4.

You can click ImageButton ‘Recovery’ to recover the WiFi hotspot.
5

Step 5

It will paralyze only one terminal which connects to a WiFi hotspot.
6

Step 6

STEP1:Select a mobile terminal which already connected one WiFi hotspot.

STEP2:As show in Figure 2-1,Click ImagButton ‘Paralyze’.
7

Step 7

STEP3: This is a dialog to set duration. Click on the drop-down arrow to select time. And then click ‘confirm’ to paralyze the network of the terminal.As show in Firure 2-3.

If it works then ImageButton ‘Paralyze’ has changed.As show in figure 2-4.

You can click ImageButton ‘Recovery’ to recover network of the terminal.

WiFi Analyse and Terminator