LICENSE.mdCC-BY-SA-4.0md - 264.00 bytes - 09/15/2017 at 20:31 |
|
|
upper plain.stl3d printable holder clip. upper part, no hook or screw hole.Standard Tesselated Geometry - 129.96 kB - 04/17/2017 at 12:02 |
|
|
lower plain.stl3d printable holder clip, lower partStandard Tesselated Geometry - 461.41 kB - 04/17/2017 at 12:02 |
|
|
upper side open.stlsame as upper plain.stl, but with a hook for mounting on the sidesStandard Tesselated Geometry - 312.58 kB - 04/17/2017 at 12:02 |
|
|
upper side closed.stlsame as upper side open.stl, but with a screw hole instead of a hookStandard Tesselated Geometry - 490.51 kB - 04/17/2017 at 12:02 |
|
|
lower rear open.stlsame as lower plain, but with a hook for mounting on the rearStandard Tesselated Geometry - 456.23 kB - 04/17/2017 at 12:02 |
|
|
lower rear closed.stlsame as lower plain, but with a screw hole for mounting on the rearStandard Tesselated Geometry - 521.96 kB - 04/17/2017 at 12:02 |
|
|
plamp.3dmSource file with all the geometries for the 3d printable holder clips. Rhinoceros 5 format.3dm - 4.56 MB - 04/17/2017 at 12:03 |
|