Boian Mitov-
1Assemble the Motors
-
2Install the Motors on the Chassis
-
3Installing the Motor Driver Board on the Chassis, and connect the Motors to it
-
4Installing the Line Following Sensors on the Chassis
-
5Installing the Arduino Board and the Sensors Shield on the Chassis
-
6Installing the Infrared Remote Receiver Module on the Chassis
-
7Installing the Rechargeable Battery Box on the Chassis
-
8Installing the Servo turning the Ultrasonic Ranger
-
9Installing the Ultrasonic Ranger on its holder
-
10Installing the Ultrasonic Ranger on the Servo at front of the robot
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.