POV_footprints.zipKicad footprints for POV. Unzip these into lib_fp.pretty in the project directoryZip Archive - 5.07 kB - 11/04/2019 at 01:36 |
|
|
T84_POV.kicad_pcbKicad PCBx-kicad-pcb - 83.19 kB - 11/04/2019 at 01:31 |
|
|
T84_POV.netKicad Netlistnet - 14.81 kB - 11/04/2019 at 01:31 |
|
|
T84_POV-cache.libKicad schematic librarylib - 5.35 kB - 11/04/2019 at 01:31 |
|
|
T84_POV.schKicad Schematicx-kicad-schematic - 15.70 kB - 11/04/2019 at 01:31 |
|
|
T84_POV.proKicad Project filex-kicad-project - 661.00 bytes - 11/04/2019 at 01:31 |
|
|
T84_POV_Click_Text.inoFinal version of the operational POV program. Implements wake-on-double-tap, sleep when put down, and has a stable text display.ino - 9.46 kB - 09/12/2017 at 23:23 |
|
|
T84_POV_Test_Accel_Max.inoVersion to test the x and y acceleration values and directions using the led array.ino - 4.34 kB - 09/12/2017 at 04:25 |
|
|
T84_POV1.inoFirst version of code for the POV board. This simply displays "HAD" and shows the timing and algorithm for letter creation. The accelerometer is not used and the display is not stable.ino - 2.05 kB - 09/10/2017 at 03:56 |
|
|
POV_Fidget.stlThe stl version of the new spinner body.sla - 443.34 kB - 09/10/2017 at 03:52 |
|
|
POV_Fidget.fcstdFidget spinner body designed for the POV board and battery. This is the freeCAD source file.x-extension-fcstd - 8.71 kB - 09/10/2017 at 03:50 |
|
|
POVnuProgBoard.pngThe POV board showing the placement of the footprints for the uProgrammers.Portable Network Graphics (PNG) - 16.66 kB - 07/30/2017 at 00:29 |
|
|
2x3uProgBoard.pngThe 2x3 uProgrammer board.Portable Network Graphics (PNG) - 16.49 kB - 07/30/2017 at 00:29 |
|
|
POVnuProgSchem.pngThe schematic for the POV showing how the uProgrammers were included.Portable Network Graphics (PNG) - 20.16 kB - 07/30/2017 at 00:29 |
|
|
2x3uProgSchem.pngThe 2x3 uProgrammer schematic.Portable Network Graphics (PNG) - 5.14 kB - 07/30/2017 at 00:29 |
|
|
T2_T84_IMU.JPGBreadboard showing Teensy 2, ATTINY84, and the IMU with accelerometer.JPEG Image - 150.50 kB - 07/30/2017 at 00:15 |
|
|
I2CSignal.JPGRigol screenshot showing the I2C signal captured and decoded.JPEG Image - 1.29 MB - 07/30/2017 at 00:15 |
|
|
2x3uProgPads.JPGThe 2x3 uProgrammer pads on the programmer board and on the POV board, and the contactor used.JPEG Image - 171.50 kB - 07/29/2017 at 23:54 |
|
|
2x3uProgInUse.JPGHow the uProgrammer looks when it's connected to the POV board.JPEG Image - 180.50 kB - 07/29/2017 at 23:54 |
|
|
2x3uProgClip.JPGThe 2x3 uProgrammer in place on the clip showing the alignment frame.JPEG Image - 162.50 kB - 07/29/2017 at 23:54 |
|
|
1x6uProgMount.JPGThe 1x6 uProgrammer showing the pads, the alignment frame in place, and the contactor.JPEG Image - 165.50 kB - 07/29/2017 at 23:54 |
|
|
HAD Image.jpgFrom the video of the prototype spinning!JPEG Image - 128.62 kB - 07/29/2017 at 23:29 |
|
|