Quantity   Component name
1 × Arduino UNO or Equivalent Arduino was used as brain of Bionic hand. We have used Seeedstudio Lotus. The following link provides all the information about the usage of the component: http://wiki.seeed.cc/Seeeduino_Lotus/
1 × Temperature Sensor Temperature sensor was used for temperature sensitive feedback system. The following link provides all the information about the usage of the component:http://wiki.seeed.cc/Grove-Temperature_Sensor_V1.2/
1 × Capacitive Touch button Touch button was used for temperature sensitive feedback system. The following link provides all the information about the usage of the component: http://wiki.seeed.cc/Grove-Touch_Sensor/
1 × WS2813 LedStrip - 144 Leds/meter (20 LEDs) WS2813 LedStrip was used for temperature sensitive feedback system. The following link provides all the information about the usage of the component: https://www.seeedstudio.com/WS2813B-Digital-RGB-LED-Flexi-Strip-144-LED-1-Meter-p-2816.html
2 × 10K ohm resistors The resistors were used potential divider circuitry with force sensing resistors. We require 2 resistors to develop a potential divider circuit across the Force Sensing Resistor. Refer to the circuit diagram for the attachment of this components.
2 × Force Sensing Resistors The Force Sensing Resistors were used for force sensitive feedback system. We require 2 FSR for developing the feedback system. One resistor is on the thumb to detect the pinching action and the other is on the palm for detecting the grabbing action. Refer to the circuit diagram for the attachment of the components.
1 × Servo Motor The servomotor was used for the mechanism which, operates the various fingers of the hand. In order to give the feedback to the user for the firmness of his grip we have used a servo motor. Refer to the circuit diagram for attachment of this component.
1 × Push button switches The switches were used to operate to the system in different modes and for e.g. calibration of sensor reading and operation of thumb independently. Refer to following website for its attachment: https://myhumankit.org/en/tutoriels/myoelectric-exiii-hand/