leg_lift_rr0325.inoSketch March 2019ino - 4.23 kB - 03/26/2019 at 19:50 |
|
|
leg short upper.stlmarch 2019 new legStandard Tesselated Geometry - 620.39 kB - 03/26/2019 at 19:48 |
|
|
leg short lower.stlmarch 2019 new legStandard Tesselated Geometry - 467.66 kB - 03/26/2019 at 19:48 |
|
|
leg_lift_direct1013.inofinal walking fileino - 2.60 kB - 10/13/2018 at 19:44 |
|
|
easter egga.stlsupercon badgeStandard Tesselated Geometry - 60.92 kB - 10/11/2018 at 18:30 |
|
|
easter egg back.stlsupercon badgeStandard Tesselated Geometry - 2.23 kB - 10/11/2018 at 18:30 |
|
|
f3d - 103.23 kB - 06/27/2018 at 19:20 |
|
|
Standard Tesselated Geometry - 124.30 kB - 06/27/2018 at 19:20 |
|
|
f3d - 86.27 kB - 06/27/2018 at 19:20 |
|
|
Standard Tesselated Geometry - 57.89 kB - 06/27/2018 at 19:20 |
|
|
f3d - 447.70 kB - 06/22/2018 at 13:19 |
|
|
Standard Tesselated Geometry - 435.14 kB - 06/22/2018 at 13:19 |
|
|
Standard Tesselated Geometry - 265.51 kB - 06/22/2018 at 13:19 |
|
|
f3d - 243.05 kB - 06/22/2018 at 13:19 |
|
|
Waveform Audio File Format (WAV) - 439.41 kB - 06/03/2018 at 19:43 |
|
|
f3d - 71.45 kB - 06/03/2018 at 19:43 |
|
|
f3d - 77.91 kB - 06/03/2018 at 19:43 |
|
|
Standard Tesselated Geometry - 51.64 kB - 06/03/2018 at 19:43 |
|
|
Standard Tesselated Geometry - 46.18 kB - 06/03/2018 at 19:43 |
|
|
Standard Tesselated Geometry - 64.44 kB - 06/03/2018 at 19:43 |
|
|
Standard Tesselated Geometry - 101.64 kB - 06/03/2018 at 19:43 |
|
|
f3d - 62.42 kB - 06/03/2018 at 19:43 |
|
|
f3d - 47.92 kB - 06/03/2018 at 19:43 |
|
|
Standard Tesselated Geometry - 1.52 MB - 06/03/2018 at 19:43 |
|
|
Standard Tesselated Geometry - 2.58 MB - 06/03/2018 at 19:42 |
|
|
Standard Tesselated Geometry - 4.26 MB - 06/03/2018 at 19:40 |
|
|
Standard Tesselated Geometry - 15.06 MB - 06/03/2018 at 19:39 |
|
|
Standard Tesselated Geometry - 230.84 kB - 05/25/2018 at 20:28 |
|
|
ino - 1.81 kB - 05/24/2018 at 19:55 |
|
|
Standard Tesselated Geometry - 74.30 kB - 05/24/2018 at 19:39 |
|
|
f3d - 58.16 kB - 05/24/2018 at 19:39 |
|
|
axle bolt.stl100% fillStandard Tesselated Geometry - 840.80 kB - 05/20/2018 at 20:50 |
|
|
f3d - 71.16 kB - 05/20/2018 at 20:49 |
|
|
f3d - 715.25 kB - 05/20/2018 at 20:46 |
|
|
Servo twist holder.stl50% fillStandard Tesselated Geometry - 241.78 kB - 05/20/2018 at 20:46 |
|
|
servo shoulder holder.stl50% fillStandard Tesselated Geometry - 218.64 kB - 05/20/2018 at 20:45 |
|
|
upper lega.stl30% fillStandard Tesselated Geometry - 1.30 MB - 05/20/2018 at 20:35 |
|
|
wire guide.stl30% fillStandard Tesselated Geometry - 89.44 kB - 05/20/2018 at 20:35 |
|
|
f3d - 173.60 kB - 05/20/2018 at 20:35 |
|
|
f3d - 88.79 kB - 05/20/2018 at 20:35 |
|
|
Super Servo combo.stl50% fillStandard Tesselated Geometry - 62.78 kB - 05/20/2018 at 20:31 |
|
|
- 185.74 kB - 05/20/2018 at 20:31 |
|
|
lower leg.stl30% fillStandard Tesselated Geometry - 849.11 kB - 05/20/2018 at 20:31 |
|
|
f3d - 183.72 kB - 05/20/2018 at 20:31 |
|
|
bearing linearb.stl100% fillStandard Tesselated Geometry - 402.82 kB - 05/20/2018 at 20:31 |
|
|
f3d - 214.72 kB - 05/20/2018 at 20:31 |
|
|
axle.stl30% fillStandard Tesselated Geometry - 907.02 kB - 05/20/2018 at 20:31 |
|
|
ankle servo conn.stl100% fillStandard Tesselated Geometry - 121.37 kB - 05/20/2018 at 20:31 |
|
|
foot.stl10% fillStandard Tesselated Geometry - 65.90 kB - 05/20/2018 at 20:31 |
|
|
f3d - 91.26 kB - 05/20/2018 at 20:31 |
|
|
foot holdera.stl30% fillStandard Tesselated Geometry - 108.58 kB - 05/20/2018 at 20:31 |
|
|
f3d - 350.11 kB - 05/20/2018 at 20:31 |
|
|
f3d - 86.57 kB - 05/20/2018 at 20:31 |
|
|
axle nut.stl100% fillStandard Tesselated Geometry - 241.29 kB - 05/20/2018 at 20:31 |
|
|
f3d - 55.06 kB - 05/20/2018 at 20:31 |
|
|
back bearinga.stl100% fillStandard Tesselated Geometry - 62.97 kB - 05/20/2018 at 20:31 |
|
|
f3d - 52.44 kB - 05/20/2018 at 20:31 |
|
|
f3d - 57.03 kB - 05/20/2018 at 20:31 |
|
|
sit031618.inoSit testino - 1.60 kB - 03/16/2018 at 19:11 |
|
|
torque_test.inoThis rotates an arm to the 90 degree position to test a servo motor's torque.ino - 289.00 bytes - 03/13/2018 at 19:00 |
|
|
ino - 1.55 kB - 03/12/2018 at 20:43 |
|
|
leg_test022718.inoStand up and sit down testino - 1.61 kB - 02/28/2018 at 00:22 |
|