Assemble the Hardware like described in the video. Afterwards download the latest FabScanPi Raspbian Image ( from fabscan.org) and flash it to the SD-Card.

Insert the SD-Card to your Pi. Then connect your FabScanPi to your local network (router or switch) and also connect the 12V power supply.

After the Pi is booted you can point your browser to

http://[ ip-address-of-your-raspberry-pi ]

Hint: If you have zeroconf compatible Laptop or Tablet ( e.g. Apple's Bonjour) you can find your FabScan Pi setup by pointing your browser to http://fabscanpi.local

Happy scanning!

For full instructions visit the docs at GitHub pages: http://mariolukas.github.io/FabScanPi-Server/