1 |
× |
Arduino Pro Mini 3.3V 8MHz
(Original prototype used an Nano, New version is 3.3V
|
1 |
× |
Adafruit FONA 808 GPRS+GPS Breakout
Adafruit GSM mobile phone module with buitl-in GPS
|
1 |
× |
MPU6050 breakout
MPU6050 I2C sensor breakout
|
1 |
× |
MFRC522 RFID reader
SPI Mifare compatible RFID reader/writer
|
1 |
× |
MiFare classic 1K RFID cards (PICC)
You usually get a couple with the MFRC522 reader
|
1 |
× |
3.7V LiPo Battery
2500mAH flat pack lipo battery with JST=PH connector(Not Needed if feeding unit directly)
|
1 |
× |
uFL GSM antenna
passive uiFL GSM/GPRS antenna for the FONA 808
|
1 |
× |
uFL GPS antenna
passive uiFL GPS antenna for the FONA 808
|
1 |
× |
SIM card
2G SIM card (with service)
|
1 |
× |
(optional) 48VDC->5VDC step-down converter - micro-USB
If you're going to install it in an e-Bike battery, you may as well have that battery power it right?
|
1 |
× |
(optional) 12VDC->5VDC step-down converter - micro-USB
Or if you install it in a Motorcycle/ATV/whatever you can charge it from the vehicles 12V battery
|
1 |
× |
Small solderable proto-board (Breadboard type)
See photos
|
1 |
× |
Ribbon Cable (at least 7 conductor)
|
1 |
× |
Kaptan Tape
|
1 |
× |
Some hook up wire
|
1 |
× |
pin header 2.54mm male and female
|
1 |
× |
USB->UART adapter (to program Arduino)
|