Quantity | Component name | |
1 | × | 20mm hiwin profiled rail |
1 | × | SKF ball screws |
5 | × | Kinco 2M880N. 8 amp drivers 5? yep, hot swap built into the design. In the event of one dying, move some cables and up and running again! |
4 | × | steppers, nothing special, low impedance SY60 NEMA 34 types. |
1 | × | Huangyang 3hp 24k rpm water cooled spindle |
1 | × | Huangyang 2.2kw inverter |
1 | × | Thermaltake PC cooling system pump, radiator, fans and tank used. |
5 | × | Arduino mega used to monitor voltages, temperatures and other critical elements. Big thanks to the Shanghai hackerspace for the help!! |
5 | × | 4 line x 40 Blue LCD screens |
1 | × | ADXL377 accelerometer. Bonded to the spindle and used to find sweet spot with speeds and feeds. |
10 | × | 18DS20 temp sensors feeds temp data back to the Megas. Could have probably run it all from one mega, but... :-) |
6 | × | OMRON Z-15HQ22 micro switches |
4 | × | Ignus E-Chain |
1 | × | LED, Lots of led. |
14 | × | 14 metres 80mm thick wall box section. |
10 | × | 10 metres 40mm thick wall box section |
2 | × | 2 metres 50x50 angle iron |