1 |
× |
PCB
Electronic Components / Misc. Electronic Components
|
1 |
× |
74LVC245
Logic ICs / Receivers, Transceivers
|
3 |
× |
220 ohm resistor
|
1 |
× |
1k ohm resistor
|
1 |
× |
10k ohm resistor
|
1 |
× |
100nF disc ceramic capacitor
|
1 |
× |
2x3 pin male header
6-pin AVR in-circuit programming header
|
1 |
× |
2x5 pin male header
10-pin AVR in-circuit programming header
|
1 |
× |
2x13 pin male header
To leave this board in place while using other boards with the Pi, use header with extra long pins
|
1 |
× |
1x2 pin male header (optional)
Only used to provide 5V power to the microcontroller being programmed
|
1 |
× |
1x3 pin male header (optional)
Only needed when buffering GPIO signals from, or, to, the Raspberry Pi
|
2 |
× |
1x5 pin male header (optional)
Only needed when buffering GPIO signals from, or to, the Raspberry Pi
|
1 |
× |
Programming cable (6pin F to F, or 10 pin F to F)
The 6 or 10 pin cable connects the programmer to a board with an AVR part to be programmed
|