Telescope Controller

Back to overview

Stellaris (Tiva-c) based embedded controller for Newtonian/Dobsonian motorized telescope mount

sq7bti

1

Step 1

I have couple of PCB's to share.
2

Step 2

solder all header pins to stepper motor driver PCB but four to the motor
3

Step 3

solder extra 1x3 pin connectors (next to SW1 and SW2) to Tiva-C board to provide VBUS and +3.3V connectivity, or even better replace them with stackable connectors - just like the other ones (2x10)

Discussions